曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Fig. 5.44    Unit-step response of full-state feedback design ofExample 5.15.
Comparing the coefficients of the above characteristic equation with that of the
desired characteristic equation, we get ki = 110.7543, k2 - 53.6, and k3 = 1-10.
    Thus, the given system with full-state feedback is given by
[{:i']
  0     1
0 O ,:,Ol[x[:l+[{lr,t,
-125.7543 -76.6 -
   Now, we verify the design by simulating a response to a unit-step input using
MATLAB.4 The results ofthe simulation are shown in Fig.5.44.It can be observed
that the design requirements have been met.
Given the system
Example 5.16
 /ji:] = [:5  -3  -,] [x::] +[{].,t,
y=[l  0  0] C::]
LINEAR SYSTEMS, THEORY, AND DESIGN: A BRIEF REVIEW        529
    1) Express the given plant in dual phase-variable form. 2) Design a full-state
observer so that the closed-loop characteristic equation is given by S3 + lOOS2 +
1500s + 40,000 -  0. 3) Verify the design for u(t) = 25t assunung xi(0) = 5,
X2(0) : 1.5, and X3(0) : 0.25.
Solution.   We have the given system
                                      x - Ax + Bu
where
    -5 .2  0
A-  1  -3  1
    o  1-
y = Cx
B=[{]  C=[l 0 0]
It is converuent to use MATLAB4 to compute the observability matrix, which for
this system is found to be
Qo.l=[-,~s -,6 0;]
Using MATLAB,4 we find that this system has full rank of three; hence the system
is observable. Furthermore,
Q-,l = [i:.i
:011 00:5]
 Next step is to express the given plantin the dualphase-variable form. We know that
the elements of the first column of the matrix in dual phase-variable form are the
 coefficients of the characteristic equation. Conversely, given the coefficients of the
charactenstic equation, we can directly write down the dual phase-variable form
of matrix A.
     As we know, the characteristic equation is given by
A(s) -. lsl - Al = 0
S3+9S2+20s+8 = 0
 0.5
0.45
 0.4
0,35
o 0.3
g
E 0.25
<
 0.2
0.15
 0.1
0.05
     o
530           PERFORMANCE, STABILITY, DYNAMICS, AND CONTROL
Then, the dual phase-variable fc        if the giver

Furthermore, we assume that
             Cz=[l 0 0]
Then,
QO.z = (_g;A2):]
P - Qo IQo*z
= [-2
-9 1]
  Now let us design the full-state observer for the system transformed in dual
phase-variable form. We have
                      -(9+11) 1
         Az-LzCz= -(20+12) 'g ,]
                     -(8+13) 0
The characteristic equation of the observer is given by
                                    S3 + (9 +II)SZ + (20 +I2)S +8 +l3 = 0
    The desired characteristic equation is
                                                S3 + lOOS2 + 150Cs + 40,000 -. O
      Comparing the coefficients oflike powers of s, we get li  - 91,12  =  1480, and
l3 = 39,992. Then, the gain matrix corresponding to the given system is obtained
by Lransforming back as
~.r = P,z = [,j:'84,]
LINEAR SYSTEMS, THEORY, AND DESIGN: A BRIEF REVIEW      531
:j
4
ZJ
a
.J
┏━━━━━━┳━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃            ┃      ┃   ..,..I.I                                                     ┃
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：PERFORMANCE, STABILITY, DYNAMICS, AND CONTROL3(85)