5. Close-up
________ Subtask 24-21-51-410-057
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the fan cowl doors (Ref. TASK 71-13-00-410-040):
-
FOR 1000EM1
437AL, 438AR
-
FOR 1000EM2
447AL, 448AR
(3)
Remove the warning notice(s).
GENERATOR - INTEGRATED DRIVE (IDG) (4000XU) - INSPECTION/CHECK
______________________________________________________________
TASK 24-21-51-210-001
Check of the IDG Oil-Filter Differential-Pressure Indicator (DPI)
WARNING : BE CAREFUL WHEN YOU WORK ON THE ENGINE COMPONENTS IMMEDIATELY AFTER
_______ THE ENGINE IS SHUTDOWN. THE ENGINE COMPONENTS CAN STAY HOT FOR UP TO ONE HOUR.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific inspection lamp
No specific inspection mirror
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
TSM 24-OBSV (for corrective action)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
24-21-51-991-001 Fig. 601 R **ON A/C 401-499,
R 24-21-51-991-001-A Fig. 601A
R **ON A/C ALL
3. Job Set-up__________
Subtask 24-21-51-941-055
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice in position to tell persons not to start the engine.
(2) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice in position to tell persons not to energize the FADEC 1(2).
Subtask 24-21-51-010-057
B. Get Access
(1) Open the fan cowls (Ref. TASK 71-13-00-010-040): - FOR 1000EM1 437AL, 438AR, - FOR 1000EM2 447AL, 448AR.
4. Procedure_________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
(Ref. Fig. 601/TASK 24-21-51-991-001)
R **ON A/C 401-499,
R (Ref. Fig. 601A/TASK 24-21-51-991-001-A)
Differential Pressure Indicator (DPI) of the Oil Filter
Figure 601/TASK 24-21-51-991-001
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 24-21-51Page 603 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1R Differencial Pressure Indicator (DPI) of the Oil Filter R Figure 601A/TASK 24-21-51-991-001-A
R 1EFF : 401-499, 1 24-21-51Page 604 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL
Subtask 24-21-51-210-059
A. Visual Inspection of the Oil Filter DPI
(1) Make sure that the red button of the DPI is not extended:
-use an inspection lamp and an inspection mirror, if necessary.
(a) If the red button is extended from the end of the DPI:
-do the alternative procedure (Ref. TSM 24-OBSV).
5. Close-up
________
Subtask 24-21-51-410-055
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the fan cowls (Ref. TASK 71-13-00-410-040):
-
FOR 1000EM1
437AL, 438AR,
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ELECTRICAL POWER 電源1(94)
