曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 (3) Clean the area with CLEANING AGENTS (Material No. 11-010) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).
 EFF : ALL 25-00-00Page A824

Aug 01/05
R
 CES

 CC Honeycomb Linings, Filler - Damage Not Through Figure 824/TASK 25-00-00-991-038
R  EFF : CES  ALL  25-00-00 Page A825 Aug 01/05 

 

 (4) Fill the
 -
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115) or

 -
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115A) or

 -
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115B) or

 -
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115C) into the prepared area.

 NOTE : Obey the manufacturers instructions.
____
 (5) Make the cured repaired area smooth with emery cloth, grade 80-120
 5. Close-up
________
 Subtask 25-00-00-410-063
 A. Close Access
 (Ref. TASK 25-00-00-200-001)

 EFF : ALL 25-00-00Page A826

Aug 01/05
R
 CES  TASK 25-00-00-340-005

 Patch and Filler Repair Method (Damage not Through) - All Cargo Compartment Linings with Honeycomb Core
 1. Reason for the Job
__________________
 Refer to the AMM task 25-00-00-200-001
 2. Job Set-up Information
______________________
 A. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific emery cloth, grade 80-120 Material No. 08-075 D WA-10016
 QUICK SETTING EPOXY ADHESIVE KIT (Ref. 20-31-00) Material No. 08-076 D WA-10016
 QUICK SETTING EPOXY ADHESIVE KIT (Ref. 20-31-00) Material No. 08-077 D WA-10016
 QUICK SETTING EPOXY ADHESIVE KIT (Ref. 20-31-00) Material No. 08-115 AIB AIMS 08-08-001
 CORE FILLER AMBIENTTEMPERATURE CURING (Ref. 20-31-00) Material No. 08-115A AIB AIMS 08-08-001
 CORE FILLER AMBIENTTEMPERATURE CURING (Ref. 20-31-00) Material No. 08-115B AIB AIMS 08-08-001
 CORE FILLER AMBIENTTEMPERATURE CURING (Ref. 20-31-00) Material No. 08-115C D DAN 1282
 CORE FILLER AMBIENTTEMPERATURE CURING (Ref. 20-31-00) Material No. 11-010 USA TT-I-735 GRADE A
 ISOPROPYL ALCOHOL (Ref. 20-31-00) Material No. 19-003 USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-00-00-200-001 Cargo Compartment Linings with Honeycomb Core -
General Repair/Protection Information 25-00-00-991-036 Fig. 825
 EFF : ALL 25-00-00Page A827

Aug 01/05
R
 CES  3. Job Set-up

__________
 Subtask 25-00-00-010-060
 A. Get Access
 (Ref. TASK 25-00-00-200-001)

 4. Procedure
_________
 Subtask 25-00-00-220-062
 A. Identify the Damage Limits (Ref. TASK 25-00-00-200-001)
 (1)
 If the length of a damaged area is more than 25 mm (0.98 in.):

 -the minimum distance to another damaged area or repaired area in the same panel is 50 mm (1.97 in.)
 -If the distance to another damaged area is less than 50 mm (1.97 in.), both damaged areas should be considered as a single damage.

 (2)
 Select the appropriate repair kit.

 -
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-075) or

 -
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-076) or

 

 -BONDING AND ADHESIVE COMPOUNDS (Material No. 08-077) |------------------------------------|---------------------------------------| | Mat.-No.: | Damage length: | Damage width: | |------------------------------------|---------------------------------------| |08-075(Akro Fireguard Patch, small) | 50.8 mm (2.0 in.) | 50.8 mm (2.0 in.) | |------------------------------------|---------------------------------------| |08-076(Akro Fireguard Patch, medium)| 50.8 mm (2.0 in.) | 152 mm (6.0 in.) | |------------------------------------|---------------------------------------| |08-077(Akro Fireguard Patch, large) | 152 mm (6.0 in.) | 152 mm (6.0 in.) | |------------------------------------|---------------------------------------|
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備1(76)