F 『 EEFF : ALL E Page 61371-11-00
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
R R R
R E. Scratch
R R R
R 2. Examine riveted joint for: A. Crack
R R R R
3. Examine the area 5 in. (127 mm) from engine attachment ring for:
F 『
EEFF : ALL E
E E
E E
ECES E
10 in. (254 mm) minimum separation between cracks
0.005 in. (0.13 mm) maximum depth
1 in. (25.4 mm) maximum length 2 in. (50.8 mm) minimum separation from other damage
Stopped between two adjacent fasteners in joint of ten or more fasteners
10 in. (254 mm) minimum separation between cracksPermanent repair at "C" check recommended (Ref. SRM 541000).
Monitor at "A" check.
Permanent repair at "C" check recommended (Ref. SRM 541000).
Do not stop drill.
Monitor at "A" check.
Permanent repair at "C" check recommended (Ref. SRM 541000).
71-11-00Page 614
May 01/05
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
R A. Gouge 0.01 in. (0.25 mm) maximum depth Monitor at "A" check.
R R R Permanent repair at "C" check recommended (Ref. SRM 541000).
0.10 in. (2.54 mm) maximum width
1 in. (25.4 mm) maximum lenght
1.5 in. (38.1 mm) minimum from honeycomb core edge
10 in. (254 mm) minimum separation between gouges
R B. Scratch 0.005 in. (0.13 mm) maximum depth Monitor at "A" check.
R R R Permanent repair at "C" check recommended (Ref. SRM 541000).
1 in. (25.4 mm) maximum length
2 in. (50.8 mm) minimum separation from other damage
F 『 EEFF : ALL E Page 61571-11-00
E E May 01/05 E E ECES E Subtask 71-11-00-210-053
F 『
E C F M E
E E
E 56-5B E
E E
C. Do a Visual Inspection of the Intake Cowl Lip Structure
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
1. Examine fastener areas of lip skin to intake cowl forward bulkhead for:
A. Crack
R B. Dent
R R R
2. Examine lip skin for:
R A. Crack R No cracks permitted
No evidence of loose or pulled rivets
1 in. (25.4 mm) maximum diameter Dent must be smooth and free from sharp creases, gouges, and cracks
0.1 in. (2.54 mm) maximum depth
10 in. (254 mm) minimum seperation from other dents
Maximum of three dents each segment
2 in. (50.8 mm) maximum lenght Repair before next flight (Ref. SRM 541000).
Monitor at "A" check.
Permanent repair at "C" check recommended (Ref. SRM 541000).
Stop drill before flight (Ref. SRM 541000).
F 『 EEFF : ALL E Page 61671-11-00
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
12 in. (304.8 mm)
minimum separation from
other damage
Maximum of three cracks
each segment
R
R
R
R
R B. Dent 2 in. (50.8 mm) maximum
diameter
R
R
R
0.2 in. (5.08 mm)
maximum depth
Dent must be smooth and
free from sharp creases,
gouges, and cracks
10 in. (254 mm) minimum
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 動力裝置 POWER PLANT 1(97)
