EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-21
ALL ú ú 01 Page 401 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 034-008
(5)
Remove the drag brace pin (6) to move the upper and the lower links apart.
S 034-009
(6)
Remove the bolt (28) to disconnect the lower link (10) from the shock strut.
S 014-010
(7)
Remove the aft access panel on the right and the left bulkheads of the wheel well.
S 034-012
(8)
Remove the cotter pin.
(a)
Loosen the nut (20) on each drag brace pin (21) outboard the right and the left wheel well bulkheads.
(b)
Keep the nut (20) on the end of each drag brace pin (21) to help in the removal of the pin.
S 034-013
(9)
Remove the antirotation bolt (18) from each drag brace pin.
S 844-014
(10)
Sufficiently hold the drag brace and remove the drag brace pins
NOTE: The nut is to be used for the removal of each drag brace
____ pin to prevent damage to the pin threads.
S 844-015
(11) Lower the drag brace below the lower end of the actuator and remove it from the area.
TASK 32-21-21-404-041
3. Nose Landing Gear Drag Brace Assembly Installation (Fig. 401)
__________________________________________________
A. Consumable Materials
(1) Corrosion Preventive Compound - Mastinox 6856K
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-21
ALL ú ú 01 Page 402 ú Mar 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE A
SEE C
SEE B
FWD
24. TRUNNION
GAP ALLOWABLE BETWEEN SPHERICAL BEARING (19)18. ANTIROTATION AND TRUNNION AFTERBOLT INSTALLATION
19.
SPHERICAL BEARING
20.
NUT
INBD 21. PIN
23. KEYED WASHER FWD 22. FLAT WASHER
A
Nose Gear Drag Brace Installation Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-21
ALL ú ú 01 Page 403 ú Oct 25/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
28. BOLT
25. NUT
10. LOWER
LINK 26. FORK
27. WASHER
B
1.
ACTUATOR
2.
UPPER LINK
3.
BOLT
4.
WASHER
15. WASHER
5.
WASHER
6.
PIN
13.
WASHER
14.
SWIVEL
7. SPACER
BUSHING12. WASHER 8. LOCK LINK
11. BOLT
9. SPACER
BUSHING10. LOWER LINK
C
Nose Gear Drag Brace Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-21-21
ALL ú ú 01 Page 404 ú Feb 20/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
B.
C.
D.
A
737-300/400/500MAINTENANCE MANUAL
(2)
D00633 Grease - BMS 3-33
(3)
D00013 Grease - MIL-PRF-23827
(4)
Solvent - PD-680, Commercial (AMM 20-30-31/201)References
(1)
AMM 07-11-21/201, Jack Airplane
(2)
AMM 32-00-01/201, Ground Lock Assemblies
(3)
AMM 32-21-61/401, Drag Brace Bearing - Nose Landing Gear
(4)
AMM 32-33-00/501, Extension and Retraction - Nose Landing GearPrepare to Install the Drag Brace Assembly
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 2(30)
