B.
Access

 (1)  
Location Zone
 101 Control Cabin - Left
 102 Control Cabin - Right
 205 Electrical Compartment
 217 Right Main Wheel Well

 C.
Antiskid Valve and Brake Function Test

 (1)
Pressurize the A and B hydraulic systems (AMM 29-15-00/201).

 (2)  
Make sure the wheel chocks are in position.

 S 845-046
 S 845-089
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-00
 ALL  ú ú 01 Page 508 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 845-090
 (3)  
Release the parking brake.

 S 845-047

 (4)  
Open the ANTISKID FAIL WARN circuit breaker on the P6 panel.

 S 845-048

 (5)  
Remove the electrical connector D928 from the shutoff valve of the parking brake.

 S 845-049

 (6)  
Close the ANTISKID FAIL WARN circuit breaker on the P6 panel.

 S 845-050

 (7)  
Set the parking brake.

 S 725-051

 (8)  
Do the skid response test.

 (a)  
Put the selector switch on the anti-skid module to the LO and the RO position and do the steps that follow for each switch position: 1) Push and release the SKID and the LW buttons. 2) Make sure the outboard brakes momentarily release.

 (b)  
Put the selector switch to the RI and the LI positions and do the steps that follow at each position: 1) Push and release the SKID and the LW buttons. 2) Make sure the inboard brakes momentarily release.

 S 725-052
 (9)  
Do the test for the Locked wheel response.

 (a)  
Put the selector switch to the LO position. 1) Push and hold the VALVE and the LW buttons. 2) Make sure the right green LED comes on and the left

 outboard brakes release.

 (b)  
Put the selector switch to the LI position. 1) Push and hold the VALVE and the LW buttons. 2) Make sure the right green LED comes on and the left inboard

 brakes release.

 (c)  
Put the selector switch to the RI position. 1) Push and hold the VALVE and the LW buttons. 2) Make sure the right green LED comes on and the right

 inboard brakes release.

 (d)  
Put the selector switch to the RO position. 1) Push and hold the VALVE and the LW buttons. 2) Make sure the right green LED comes on and the right

 outboard brakes release.
 D. Alternate Anti-Skid Valve and Brake Function Test
 S 845-053
 (1) Remove the pressure from hydraulic system B (AMM 29-15-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-42-00
 ALL  ú ú 02 Page 509 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 725-054
 (2)  
Put the selector switch to the L ALT position.

 (a)  
Push and release the VALVE and the SKID buttons.

 (b)  
Make sure the two left brakes momentarily release.

 S 725-055
 (3)  
Put the selector switch to the R ALT position.

 (a)  
Push and release the VALVE and the SKID buttons.

 (b)  
Make sure the two right brakes momentarily release.

 E.
Put the Shutoff Valve of the Parking Brake to its Usual Condition

 S 845-056
 (1)
Open the ANTISKID FAIL WARN circuit breaker on the P6 panel.

 S 845-057

 (2)  
Connect the connector D928 to the shutoff valve of the parking brake.

 S 845-094

 (3)  
Close the ANTISKID FAIL WARN circuit breaker on the P6 panel.

 F.
Parking Brake Function Test

 S 725-059
 (1)  
Put the selector switch to the PB position.

 S 725-060

 (2)  
Push the VALVE button.

 S 725-061

 (3)  
Make sure the center green LED comes on.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 3(56)