EDGE BEAM
FITTING ACCESS DOOR
(2 LOCATIONS) 22. FLANGED

SPACER
6
21. REACTION LINK  (2 LOCATIONS)
A-A  BEARING
(2 LOCATIONS)

4. TRUNNION
26.
 BOLT

27.
 WASHER
(QTY 2)

28.
 BUSHING

29.
 NUT

30.
 BOLT 7

31.
 WASHER  (QTY 2)

32.
 BUSHING

33.
 WASHER

34.
 NUT (2 LOCATIONS)

3
3
13. IDLER LINK
C-C
4  INSTALL THE WASHER WITH THE CHAMFER POINTED TO THE HEAD OF THE BOLT
5  INSTALL THE BOLT WITH THE HEAD OUTBOARD
FULLY LUBRICATE WITH BMS 3-33 GREASE. TURN THE PARTS TO MAKE SURE THAT THERE IS SUFFICIENT LUBRICATION. CLEAN ANY UNWANTED GREASE. BMS 3-33 (RECOMMENDED), BMS 3-24 (OPTIONAL)
6
7  INSTALL THE BOLTS WITH THE HEADS FACING EACH OTHER.
Elevator Power Control Actuator (PCA), Reaction Link, and Idler Link Installation Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-05
 ALL  ú ú 01 Page 403 ú May 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

ASSEMBLY B27009-3 LINKAGE LOCK BSEE  ELEVATOR CENTER PCA ASEE 
RIG PIN HOLE 
INPUT CRANK (SHOWN IN THE CENTER POSITION) 
DIRECTION ELEVATOR UP 
CONTROL ROD 
POGO ROD 
PCA LOCK ASSEMBLY B27009-2 SEE C  LINK 
Figure 402 (Sheet 1) Elevator PCA Lockout Equipment Installation ELEVATOR CENTER PCA LEFT WING SHOWN (RIGHT WING OPPOSITE) A

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-05
 ALL  ú ú 01 Page 404 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

INPUT CRANK SUPPORT
LOCK ASSEMBLY LOCK ASSEMBLY
PIN
INPUT CRANK SUPPORT
B
LOCK ASSEMBLY PIN
B ELEVATOR UP DIRECTION LOCK ASSEMBLY
INPUT CRANK INPUT CRANK
LINKAGE LOCK ASSEMBLY B27009-3 B-B (PCA LINKAGE IN UP POSITION) B1
PCA  PCA
C
LOCK ASSEMBLY
LOCK ASSEMBLY
C
C-C
PCA LOCK ASSEMBLY B27009-2 (PCA EXTENDED) C 1 1 INSTALL LOCK ASSEMBLY B27009-3 BEFORE B27009-2
Elevator PCA Lockout Equipment Installation
Figure 402 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-05
 ALL  ú ú 01 Page 405 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

STABILIZER
PCA PRESSURE REAR SPAR
SENSOR CONDUIT
OUTBOARD PCA
PCA PRESSURE SENSOR

PCA Pressure Sensor Conduit
Figure 403

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-31-05
 ALL  ú ú 01 Page 406 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 D. Prepare for the Removal
 S 224-003
 (1)  Supply electrical power (AMM 24-22-00/201).
 S 864-007
 WARNING: KEEP PERSONS AND EQUIPMENT AWAY FROM ALL CONTROL SURFACES
_______ WHEN HYDRAULIC POWER IS SUPPLIED. AILERONS, ELEVATORS, RUDDER, FLAPS, SLATS, SPOILERS, AND STABILIZER ARE FULLY POWERED SURFACES. INJURY TO PERSONS OR DAMAGE TO EQUIPMENT CAN OCCUR WHEN HYDRAULIC POWER IS SUPPLIED.
 (2)  
Pressurize the right and center hydraulic systems
 (AMM 29-11-00/201).

 S 864-005

 (3)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 3(76)