曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

selection on the MFD control panel, located on the pedestal.
SELECTED ALTITUDE BUG
The altitude bug is set using the ALT knob on the guidance panel. The bug will park at the
appropriate end of the altitude tape when off scale. At this position, one half of the bug will be in view.
Selected
Altitude Bug
Altitude
Trend Vector
Altitude
Rolling Digits
Selected
Altitude Readout
Below 10,000 feet Guidance Panel
Selected Altitude Readout − Metric
MFD Menu
Guidance Panel
MFD Control Panel
GF1110_023
104 00
9500
10500
100 00
80 00
VERT PROFILE
METRIC ALT ON
DISPLAY 1/2
DIST/TIME
IDENTS
FLIGHT DIR
ON OFF
ON OFF
OFF
SC CP
WYPT DEST
10500
4500 M
9500
100 00
3045 M
ALT
ALT
FLIGHT INSTRUMENTS
Rev 5, Jul 21, 2005 Flight Crew Operating Manual
CSP 700−5000−6
Volume 2
11−10−17
RADIO ALTITUDE
Radio altitude is displayed on the bottom of the attitude indicator.
The radio altitude readout range is from 0 feet to 2550 feet and is displayed as follows:
· 5 foot increments − Altitude less than 200 feet
· 10 foot increments − Altitude ³ 200 feet but < 1500 feet
· 50 foot increments − Altitude ³ 1500 feet
RADIO ALTITUDE LOW ALTITUDE AWARENESS
Low altitude awareness is displayed as an indication of the ground with respect to current barometric
altitude.
Low altitude awareness is displayed when radio altitude is between 0 and 550 feet.
20 20
10 10
300
Radio Altitude
Readout 300 feet
Low Altitude
Awareness 300 feet
20 20
10 10
0
Radio Altitude
Readout 0 feet
Low Altitude
Awareness 0 feet
Low Altitude
Awareness −300 feet
GF1110_024
29.92 I N
10 0 0
29.92 I N
7 0 0
29.92 I N
3 0 0
FLIGHT INSTRUMENTS
Flight Crew Operating Manual Rev 5, Jul 21, 2005
CSP 700−5000−6
Volume 2
11−10−18
ATTITUDE DIRECTOR INDICATOR (ADI)
The ADI provides pitch, roll and roll pointer (slip/skid) information.
20
20
20
20
10 10
10 10
60
45
30
20
10
10
20
40
30
60
90
10
20
30
20
10
90
Attitude Indicator
Vertical Tape
Roll Scale
Roll Pointer
10 10
10 10
GF1110_025
0° 10° 20° 30°
45°
60°
15°
5°
2.5°
FLIGHT INSTRUMENTS
Rev 5, Jul 21, 2005 Flight Crew Operating Manual
CSP 700−5000−6
Volume 2
11−10−19
FLIGHT DIRECTOR COMMAND BARS
The Flight director command bars can be displayed in Single Cue (SC) airplane symbol or Cross
Pointer (CP) airplane symbol. Selections are made on the MFD control panel, located on the
pedestal, using the MENU button. If pitch or roll command is invalid, the flight director command bars
are removed.
Roll Right Command
MFD Control Panel
20
20
20
20
10 10
10 10
20 20
10 10
10 10
20 20
Single Cue
Desired Attitude
Pitch Down Command Pitch Up Command
Roll Left Command Roll Right Command
Cross Pointer
Desired Attitude
Pitch Down Command Pitch Up Command
Roll Left Command
GF1110_026
VERT PROFILE
METRIC ALT ON
DISPLAY 1/2
DIST/TIME
IDENTS
FLIGHT DIR
ON OFF
ON OFF
OFF
SC CP
WYPT DEST
VERT PROFILE
METRIC ALT ON
DISPLAY 1/2
DIST/TIME
IDENTS
FLIGHT DIR
ON OFF
ON OFF
OFF
CP SC
WYPT DEST
FLIGHT INSTRUMENTS
Flight Crew Operating Manual Rev 5, Jul 21, 2005
CSP 700−5000−6
Volume 2
11−10−20
ATTITUDE DECLUTTER (ROLL)
An excessive attitude occurs when roll is greater than 65 degrees. When there is an excessive
attitude the following symbology will be removed:
Autopilot Flight Director Mode Annunciations Autopilot.
HSI Select Arrow.
Low Bank Limit Arc.
Autopilot Flight Director Command Bars.
Vertical deviation Scale/Pointer Annunciator (VTA).
Marker Beacons.
Airspeed Reference Bug/Readout.
Airspeed VNAV Speed Bug.
Airspeed VSpeed Bugs/Readout.
Radio Altitude Readout.
Decision Height Readout.
Minimum descent Altitude Readout/Bug.
Selected Altitude Readout/Bug.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Bombardier_Global_000-Flight_Instruments(9)