曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

M01-320
Figure 4-19.1. AWS Harmonization Wide FOV Corrector Guide
Change 4 4-66.1
TM 1-1520-238-10
NARROW FOV CORRECTOR VALUES (PRIMARY)
M01-321
Figure 4-19.2. AWS Harmonization Narrow FOV Corrector Guide
4-66.2 Change 4
TM 1-1520-238-10
12. For enter modified correctors:
a. CDU - Select PGM.
b. CDU - Select AWS HARM.
c. Enter appropriate correction data (AZ or
EL) on CDU scratchpad.
d. Depress VAB 2 (AZ) or VAB 6 (EL), as appropriate,
to enter correction factors into
FCC.
e. The CDU screen will display harmonization
corrector Deltas and Totals in the following
format:
AWS HARMONIZATION
DELTAS -MRAZ=+
00.0 EL=+00.0
TOTALS -MRAZ=+
00.0 EL=+00.0
f. Repeat steps 1 through 10 and 12 while
reducing field of view as appropriate to
DTV-NFOV until center of impact is verified
to be within zoom FOV gates. When
FOV gates are achieved, proceed to step g.
g. Press PGM VAB to return to top level
page.
4.33.3 Aerial Rocket Control System.
NOTE
If one or more pylons have failed, rocket
firing from the failed pylon is disabled
without inhibiting rocket firing from the
remaining pylons.
a. CPG Cooperative Engagement Mode.
1. CPG ARM/SAFE switch - ARM.
2. RKT select switch - As desired.
3. Desired target - Acquire and track.
4. CPG ORT WAS - RKT.
5. Laser trigger - Press. Establish range of helicopter
to target.
6. On completion of engagement: ORT WAS -
Deselect RKT
b. Pilot Cooperative Engagement Mode.
1. MASTER ARM/SAFE switch - ARM.
2. RKT select switch - As desired.
3. ROCKETS panel - Set QTY, PEN-M and
ZONE SEL.
4. WAS - RKT.
5. Align rocket steering symbology.
6. Weapons trigger - Press until selected quantity
has been fired or target neutralized.
7. WAS - Deselect RKT.
c. Pilot or CPG Only Mode.
1. CPG ARM/SAFE switches - ARM.
2. RKT select switch - As desired.
3. ROCKETS control panel - Set QTY, PEN-M
and ZONE SEL.
4. Crewmember desiring to fire - Track target
with HMD, maintain LOS reticle on target.
Establish range.
5. WAS - RKT.
6. Align rocket steering symbology.
7. Weapons trigger - Press until selected quantity
has been fired or target neutralized.
8. WAS - Deselect RKT.
Change 4 4-66.3/(4-66.4 blank)

TM 1-1520-238-10
4.33.4 Point Target Weapons System.
When firing Hellfire missile
AGM-114A at temperatures below
-10 °C, severe ice fog can be formed
by the missile exhaust plume. The ice
fog can obscure crew visibility and
also interfere with autonomous designation.
1. MSL switch - ON, observe BIT IN PROGRESS
message on high action display and
AND. When message disappears any failed
BIT status will be displayed on AND.
NOTE
l If BIT failure indicates MSL failure,
and that missile is required to complete
the mission, another BIT cycle may be
initiated. If additional BIT indicates a
go, then missile is considered functional
and may be launched. If missile fails
second Built-In-Test (BIT) then missiles
shall be rejected.
l BIT may be overridden at any time by
placing the MSL MODE switch in any
mode other than STBY.
a. Types of Engagements.
1. Normal Mode - LOBL.
a. UPR/LWR CHAN CODE - As desired.
b. UPR/LWR CHAN QTY - As desired.
c. MSL MODE - NORM.
d. CHAN SEL switch - Establish priority
channel.
e. Observe AND for missile selection, coding
and ready status.
f. CPG ARM/SAFE switch - ARM.
g. Lase target or call for remote designator.
h. Observe AND or HIGH ACTION display
for proper missile track status.
i. CPG WAS - MSL.
j. Pilot establish helicopter in constraints.
k. Weapons trigger - Press and release.
NOTE
If ‘in constraints’ criteria are not met, the
2nd detent of the weapons trigger may be
used to override constraints inhibits and
fire missile.
1. If autonomously designating, continue
lasing until missile impact.
2. Normal Mode - LOAL.
a. UPR/LWR CHAN CODE -As desired.
b. UPR/LWR CHAN QTY - As desired.
c. MSL MODE - NORM.
d. CHAN SEL switch - Establish priority
channel.
e. Observe AND or HIGH ACTION display
for missile selection, coding and ready status.
f. LOAL select switch - As desired.
g. CPG ARM/SAFE - ARM.
h. CPG WAS - MSL.
i. Pilot establish helicopter in constraints.
j. Weapons trigger - Press and release.
k. Lase target or call for remote designator
in adequate time for terminal guidance.
3. Ripple Mode - LOBL.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：阿帕奇攻擊直升機操作手冊2(18)