3.12.2.3 Sector Search Pattern. Sector angle and pat-tern radius are linked, so that changing one will change the other. The controls and functions of the expanding square search pattern are as follows:
CONTROL/ FUNCTION INDICATOR
SECTOR  Title of screen.
gSTART AT  Selects trigger waypoint number and name for edit.
gDIR  Enter direction of .rst leg.
gORIENT  Toggles direction of .rst turn between left or right to produce a clockwise or counter clockwise (CW and CCW) pattern.
sENGAGE  Activates the pattern immediately. If a trigger waypoint is speci.ed, helicopter will .y a 9direct-to9 leg to the waypoint, and start the pattern. If 0 is entered as trigger waypoint, the pattern will start immediately. When pattern is active, ENGAGE is displayed in reverse video.
DIST-1s  Enter sector radius (D-1) distance of pattern in NM.
SECT-ANGLEs  Enter sector angle of pattern.
FINDg  Access FIND screen.
ARMg  Arms pattern, for activation when trigger waypoint becomes the TO waypoint in an active .ight pattern.
CONTROL/ INDICATOR  FUNCTION 
RTNg  Return screen.  to  previous  displayed 

3.12.2.4 Find Screen. Use the .nd screen to set sug-gested distances in the search patterns. These distances are based on a look up table embedded in AMS software. Pressing the soft key adjacent to the search object (yellow raft, smoke, hand held star) will cause the appropriate search distances to be entered in the pattern that was dis-played when the FIND soft key was pressed. The controls and functions of this screen are as follows:
CONTROL/ FUNCTION INDICATOR
FIND  Title of screen.
SK-1gYELLOW  Returns to previous screen with D-
RAFT  1, D-2, and sector angle (as applicable) set for conditions and objects displayed.
SK-2gSIGNAL Returns to previous screen with D-MIRROR 1, D-2, and sector angle (as SMOKE applicable) set for conditions and 2-CELL objects displayed. FLASHLIGHT
SK-3gDYE Returns to previous screen with D-MARKER 1, D-2, and sector angle (as LIFE JACKET applicable) set for conditions and HAND HELD objects displayed. STAR
SK-4gSMOKE Returns to previous screen with D-(BLANK) 1, D-2, and sector angle (as VERY applicable) set for conditions and CARTRIDGE objects displayed.
SK-5gLIFE Returns to previous screen with D-JACKET 1, D-2, and sector angle (as (BLANK) applicable) set for conditions and (BLANK) objects displayed.
CONDITIONs  Toggles between SUN, OVRCAST, and NIGHT condition, changing selection of search objects.
CONTROL/ INDICATOR  FUNCTION 
RTNg  Return screen.  to  previous  displayed 

3.12.3 Waypoints. A waypoint is a geographic location. Waypoints are stored in the AMS data base with a unique navigation reference point (NRP) number and name. Way-points may be part of the downloaded .ight data, created or modi.ed with the CDU, or automatically generated by the .ight planning program. Waypoints generated to start .ight plans, or as part of a search pattern are assigned special NRPs and names by the .ight planning program. A .ight plan engage start position will be labeled START. The helicopter’s position when a direct-to function is activated is marked as MAN-LL. Search pattern waypoints will be marked CR-NN, EX-NN,or SS-NN. The pattern waypoints are also numbered from 1 to 99, and will reset to 1 if the pattern is .own long enough. A waypoint that is calculated as an offset of an existing waypoint will have * in front of its name.
3.12.3.1 Create and Modify Waypoints, and Store-points. Waypoints are loaded in both CDUs by the data transfer system. Editing the waypoints changes both CDU .les and DTS .les as they are edited. Storepoints are cre-ated in the CDU by over.ying a known point, establishing a GPS position, or marking a TACAN bearing and dis-tance.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：UH-60Q 直升機技術手冊 直升機操作手冊 1(89)