曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

element by the system engineering process, and determines the impact of these
differences on system effectiveness.
Technical
Specification
A detailed description of technical requirements stated in terms suitable to form
the basis for actual design development and production.
Technical
Surveillance
Intelligence gathering methods in which clandestine listening, photographic or
emanations gathering instruments are placed within SDS facilities, or otherwise
targeted against SDS assets to gain access to denied information.
Technology
Executing Agent
The Service or agency (DoD or non-DoD) that has been delegated management
responsibility for a particular critical supporting technology by MDA or Executing
Agent.
Technology
Program
Description
The generic description of the applicable supporting technology or critical
supporting technology.
TECOM Test and Evaluation Command.
TED Technology Exploitation Demonstration.
MDA GLOSSARY, VER. 4.0 T
295
TEIPT Test and Evaluation Integrated Product Team.
TEL Transporter-Erector-Launcher.
Telemetry,
Tracking, and
Command (TT&C)
Functions performed by the satellite control network to maintain health and
status, measure specific mission parameters and processing over time a
sequence of these measurement to refine parameter knowledge, and transmit
mission commands to the satellite.
Teleprocessing The combining of telecommunications and computer operations interacting in the
automatic processing, reception, and transmission of data and/or information.
TELESAT Telecommunications Satellite.
TELINT Telemetry Intelligence.
TEMO Training Exercises and Military Operations.
TEMP See Test and Evaluation Master Plan.
TEMPEST TEMPEST is an unclassified short name referring to investigation and studies of
compromising emanations. It is often used synonymously for the term
"compromising emanations,” e.g. TEMPEST tests, TEMPEST inspection. (See
Compromising Emanations.)
TENCAP Tactical Exploitation of National Capabilities.
TEP Test and Evaluation Plan.
TER Test and Evaluation Report
TERC Test and Evaluation Resource Committee.
TERCOM Terrain Contour Matching.
Terminal Defense
Segment (TDS)
The portion of the BMDS that defeats ballistic missiles in period of flight between
atmospheric reentry and impact.
Terminal
Guidance
The guidance applied to a guided missile between midcourse and arrival in the
vicinity of the target.
Terminal Phase That final portion of a ballistic missile's trajectory between the midcourse phase
and trajectory termination.
Terminal Phase
Interceptor
A ground-based interceptor designed to intercept and destroy RVs in the
terminal phase of flight. It may also be assigned to intercept and destroy enemy
PBVs and RVs in the midcourse phase. (USSPACECOM)
Terminator Transition from sunlight to earth's shadow in space.
TERS Tactical Event Reporting System.
TES Tactical Event System.
TESP Test and Evaluation Security Plan.
TESSE Test Environment Support System Enhancement.
MDA GLOSSARY, VER. 4.0 T
296
Test and Control The ISTC Test and Control provides the human interface for testing system
hardware and software. The Test and Control will consist of the necessary
consoles, processors, and storage devices in order to be able to control all
operations of the ISTC such as configuring the system, running a scenario,
analyzing data, generating reports, and testing system hardware and software.
Test and
Evaluation (T&E)
Process by which components or systems are tested and the results evaluated
to assess progress of design, performance, supportability, etc. There are three
types of T&E -- Development (DT&E), Operational (OT&E), and Production
Acceptance (PAT&E)--occurring during the acquisition cycle. DT&E is conducted
to assist the engineering design and development process, to proof
manufacturing processes and control and to verify attainment of technical
performance specifications and objectives. OT&E is conducted to estimate a
system's operational effectiveness and suitability, identify needed modifications,
and provide information on tactics, doctrine, organization, and personnel
requirements. PAT&E is conducted on production items to demonstrate that
those items meet the requirements and specifications of the procuring contracts
or agreements. OT&E is further subdivided into two phases--Initial Operational
(IOT&E) and Follow-on Operational (FOT&E). IOT&E must be conducted before
the production decision (Milestone III) to provide a credible estimate of
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空縮略語詞典(134)