曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

usable altitude.
Properties
altitudeAdjustmentType CodeAltitudeAdjustmentType Ability to adjust the
segment altitude
primaryAlternateMinimum CodeYesNoType Adjustments applicable
to either local altimeter
or secondary altimeter.
Applicable to the final
minimums based on
altimeter settings. Set
to Y if primary
altimeter. Not
applicable for TAA or
MSA.
altitudeAdjustment ValDistanceVerticalType The adjustment value
localRemoteCode CodeYesNoType
annotation Note(0..*)
Used by
Obstruction
See diagrams: 1 - Terminal Arrival Area
1 - Minimum and Emergency Safe Altitude
1 - Obstacle Assessment Feature
AngleIndication ^
<<feature>> [Logical View::AIXM::AIXM
Features::Navaids
Points::Point Reference]
Definition
An angular reference from a navaid or with reference to a designated point.
AngleIndication ^
Properties
angle ValBearingType The indication of a
bearing (at a given
point) by the
measurement of the
angle between the
bearing and either
True North or
Magnetic North (this
should appear
explicitly or implicitly).
The angle is
measured clockwise
from 0 degrees up to
but not including 360
degrees. The value
can also be a VOR
radial. For example,
Westward is
expressed as 270.
angleType CodeBearingType A code indicating the
direction of the zero
bearing. For
example, magnetic
north or true north.
indicationDirection CodeDirectionReferenceType Code indicating the if
the angle is TO or
FROM the Navaid or
Designated Point that
is used.
trueAngle ValBearingType The indication of a
bearing (at a given
point) by the
measurement of the
angle between the
bearing and True
North. The angle is
measured clockwise
from 0 degrees up to
but not including 360
degrees. The value
can also be a VOR
radial. For example,
Westward is
expressed as 270.
cardinalDirection CodeCardinalDirectionType The angle expressed
AngleIndication ^
as compass direction.
minimumReceptionAltitude ValDistanceVerticalType The lowest altitude
that an aircraft can
receive signal.
fix DesignatedPoint(0..1) A selected point that
may have references
(distance and/or
angle indications)
pointChoice SignificantPoint(0..1) A choice of a navaid,
an airport reference
point, a TLOF aiming
Point, a fix , a lat/long
indicated by point
object, or a Rwy
threshold which
defines the facility
makeup..
annotation Note(0..*)
Used by
PointReference
SegmentLeg
See diagrams: 2 - Designated Point
2 - Point Reference
3 - Segment Leg
AngleUse ^
<<object>> [Logical
View::AIXM::AIX
M Features::Navaid
s Points::Point
Reference]
Definition
Indicates the role of the AngleIndication in the PointReference (for example, along
track versus intersecting).
Properties
AngleUse ^
alongCourseGuidance CodeYesNoType Defines if the angle indication
provides the course guidance for the
segment.
annotation Note(0..*)
Used by
Additional Associations
Note: This is an Association class between: PointReference and AngleIndication
See diagrams: 2 - Point Reference
anySimpleType ^
<<XSDsimpleType>> [Logical
View::XMLSchemaDatatypes
]
Definition
This definition is not in the official schema for schemas, but is added to support
reverse engineering into UML.
Properties
See diagrams: Basic Types
anyType ^
<<XSDcomplexType>> [Logical
View::XMLSchemaDatatypes
]
Properties
See diagrams:
anyURI
(extends: anySimpleType)
^
<<XSDsimpleType>> [Logical
View::XMLSchemaDatatypes
anyURI
(extends: anySimpleType)
^
]
Properties
whiteSpace
[Initial Value =
collapse]
null
See diagrams:
ApproachAltitudeTable ^
<<object>> [Logical View::AIXM::AIXM
Features::Procedure::Approac
h Procedure::1 - Approach]
Definition
Other altitudes (not defined by a segment) that are to be depicted on the profile
view, such as HAT for ILS CAT II approaches.
Properties
measurementPoint CodeProcedureDistanceType Indicates the point of the
altitude measurement as
reporting on a terminal
procedure chart.
altitude ValDistanceVerticalType The calculated altitude at
the indicated point.
altitudeReference CodeVerticalReferenceType The reference for the
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AIXM_51_final(18)