曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

ACS-5059 • Rev 5 - 02/2000
Collision Avoidance System User’s Manu a l
Weather
Modes
Message
Format
TCAS STBY (Blue) — TCAS system in standby
TEST (Blue) — TCAS system in TEST
TA/RA (Blue) — TA/RA Mode
TA/RA AUTO (Blue) — TA/RA Pop-Up Mode
TA ONLY (Blue) — TA Only Mode
TA AUTO (Blue) — TA Only Pop-Up Mode
TD FAIL (Yellow) — Indicator Failure
NO TCAS (Blue) — TCAS not operational.
Place Function Selector
to TCAS for a list of
faults.
TCAS FAIL (Yellow) — Failures include:
TCAS Processor or Top
or Bottom TCAS Antenna.
Place Function
Selector to TCAS for a
list of faults.
52
ACS-5059 • Rev 5 - 02/2000
Collision Avoidance System User’s Manu a l
TCAS Mode
Message
Format
TCAS STBY (Blue) — TCAS system in standby
TEST (Blue) — TCAS system in TEST
TA/RA (Blue) — TA/RA Mode
TA/RA AUTO (Blue) — TA/RA Pop-Up Mode
TA ONLY (Blue) — TA Only Mode
TA AUTO (Blue) — TA Only Pop-Up Mode
TD FAIL (Yellow) — Indicator Failure
53
ACS-5059 • Rev 5 - 02/2000
Collision Avoidance System User’s Manu a l
Fault
Message
Format
Fault
Annunciations
NOTE: If a fault occurs while in the WX function
(TCAS FAIL annunciated), switch to the TCAS function
for a list of faults.
If already in the TCAS function, faults come up automatically.
TCAS PROCESSOR
UPPER ANTENNA
LOWER ANTENNA
RADIO ALT #1
RADIO ALT #2
RADIO ALT #1 and #2
#1 XPNDR DATA BUS
#2 XPNDR DATA BUS
TRAFFIC DISPLAY
RA DISPLAY #1
RA DISPLAY #2
RA DISPLAY #1 and #2
SELECTED XPNDR
XPNDR TOP ANT
XPNDR LOWER ANT
XPNDR TCAS DATA
XPNDR CONTROL DATA
XPNDR ALT DATA #1 and #2
#1 XPNDR ALT DATA
#2 XPNDR ALT DATA
ATTITUDE
HEADING
54
ACS-5059 • Rev 5 - 02/2000
Collision Avoidance System User’s Manu a l
ITA-81A
Dedicated
TCAS Traffic
Display
55
ACS-5059 • Rev 5 - 02/2000
Collision Avoidance System User’s Manu a l
ITA-81A
Dedicated
TCAS Traffic
Display
Controls
Pushbutton Range Selectors select range to
be displayed.
TCAS/AUTO Pushbutton:At Power-Up
the screen initially displays all TCAS traffic.
Pressing the button alternates between
Full-Time and TCAS Pop-Up modes.
When in Pop-Up mode the screen clears
and remains blank until TA or RA traffic
appears.Then all TCAS traffic is displayed.
TCAS AUTO is annunciated.The
screen automatically clears when the
intruder is no longer a threat.Pressing
the TCAS/AUTO button when no TCAS
traffic is displayed returns the display to
the Full-Time mode.
Pushbutton controls select vertical display
limits.
ABOVE (Climb phase)
9000 feet above;2700 feet below – Change 7.0
8700 feet above;2700 feet below – Change 6.04a
NORMAL (Enroute phase)
2700 feet above;2700 feet below.
BELOW (Descent phase)
2700 feet above;9000 feet below – Change 7.0
2700 feet above;8700 feet below – Change 6.04a
Adjusts display brightness.
56
ACS-5059 • Rev 5 - 02/2000
Collision Avoidance System User’s Manu a l
IVA-81B
RA/VSI
Resolution
Advisory/
Vertical
Speed
Indicator
VSI Flag (Amber)
(Not capable of displaying
vertical speed)
- RA/VSI Failure
- Power Failure or
- VS Source Failure
RA OFF (White)
TCAS Flag
- TCAS is in STBY.
- TCAS in TA ONLY mode.
- Power loss in the
RA/VSI.
- System operating in
automatic TA ONLY mode.
TCAS (Amber)
Both Flags disappear during normal operation.
The RA OFF/TCAS flag may appear independently
of the VSI flag. Whenever the VSI flag appears
the RA OFF flag will also appear.
- TCAS Failure
Resolution Advisory
“Fly-Away-From”
Command Arc
(Red)
Resolution Advisory
“Fly-To” Command
Arc (Green)
Ambient Light
Sensor
Vertical Speed
Pointer
Two rows of colored lights,one red and one green,
are located around the vertical speed scale.The
RA/VSI indicates whether to climb,descend, remain
level or otherwise change the vertical speed by lighting
segments of these rows.The required vertical
maneuver keeps the pointer out of the red,and/or
into the green areas.
57
ACS-5059 • Rev 5 - 02/2000
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TCASII/ACASII Collision Avoidance System User’s Manual(10)