曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Range Rings
There are two range rings, which provide a distance scale to help visualize the airplane
position relative to navaid symbols and weather radar targets. A distance annunciator displays
by each ring. The RANGE knob (on the DCP) selects a desired display range. The possible
full-scale ranges are 5, 10, 25, 50, 100, 200, 300 and 600 nm (maximum is 300 nm with WX
selected on).
The outer range ring is a 120-degree sector of the compass rose. This arc contains index
markings every five degrees, and alphabetic or numeric markings every 30 degrees. The inner
range ring is a circle that is centered on the airplane.
NAVAID DIsplay
The NAVAID display shows airplane heading, selected heading, on-side course, cross-side
course, bearing, vertical deviation and wind information.
The sector format may display (only) two or three navaid symbols. These symbols are
generated using bearing/distance information (not FMS map data). VORTAC symbols, with
station identifiers, display if the two actively tuned VOR stations are within range, and data is
valid. The TO waypoint of the FMS flight plan will also display. No other navaid symbols
display on the sector format.
MFD Sector Format
Figure 11−10−21
FLIGHT INSTRUMENTS
Description
Vol. 2 11−10−33
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
CONTROLS AND INDICATORS (CONT'D)
FMS Map Format
This format shows a dynamic geographic depiction of the flight as it occurs. The map display is
always centered on the airplane present position, with current heading toward the top of the
screen. The screen shows a moving map display of flight plan symbols and background navaid
symbols relative to airplane present position.
NOTE
An FMS data window may be displayed on the FMS map.
Airplane Symbol
This symbol is a reference used to visualize airplane position relative to the geographic map
and radar targets. The airplane symbol is stationary, and always displayed in the center of the
screen. The navaid symbol, radar targets and flight plan line move down the screen as the
flight progresses.
Range Rings
There are two range rings displayed, which provide a distance measuring scale. These rings
show distance from the airplane. A distance annunciator displays by each ring. The RANGE
knob (on the DCP) selects a desired display range. The possible full-scale ranges are the
same as for NAV Sector format.
NAV Display
The NAV display shows the FMS flight plan line and a background navigation map. The map
consists of navaid symbols generated from the FMS database. The FMS flight plan displays on
the map as a solid white line. This track line consists of straight-line segments connecting
consecutive flight plan waypoints. The TO waypoint displays in magenta. FMS-generated
navaid and map symbols are cyan.
Data Window
The data window displays FMS progress parameters for the FROM, TO, NEXT and
Destination waypoints in the flight plan. The CDU is used to select the various options of the
data window. The data window can be selected to ON, COMP, VNAV, or OFF.
FLIGHT INSTRUMENTS
Description
Vol. 2 11−10−34
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
CONTROLS AND INDICATORS (CONT'D)
MFD Data Window
Figure 11−10−22
FLIGHT INSTRUMENTS
Description
Vol. 2 11−10−35
REV 66, Feb 01/07
CL−604 Operating Manual
PSP 604−6
CONTROLS AND INDICATORS (CONT'D)
Plan Map Format
This format shows a static geographic depiction of a section of the flight plan (or a selected
route). Use this map as a visual aid to enter a new flight plan/route, or to plan a deviation from
the flight plan/route.
The plan map is always presented with true North at the top of the screen. This screen shows
flight plan/route symbols and background navaid symbols within range. The (dynamic) weather
radar, terrain and TCAS cannot be overlaid onto the (static) plan map.
Optional “Precision Plus” FMS upgrades incorporate a 3D-map capability on the plan map page.
Range Ring
A range ring provides a distance measuring scale. This ring shows distance from the center
waypoint. The range ring also displays a range distance. The RANGE knob on the DCP
selects the desired range. The possible full-scale ranges are 5, 10, 25, 50, 100, 200, 300, and
600 nm.
NAV Display
The NAV display shows the FMS flight plan or route line and a background navigation map.
The map consists of navaid symbols generated from the FMS database. The FMS-generated
navaids and map symbols are cyan. The active FMS flight plan/route displays on the map as a
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰者604操作手冊 Operating Manual 4(25)