曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

DISPLAY UNIT FAILURE
�� The AFFECTED DU IS BLANK or the DISPLAY IS DISTORTED:
DU
(affected).........................................................................................................................
..AS RQRD
The DU can be switched off.
ECAM/ND XFR (if the ECAM DUs are
affected)...............................................................................USE
Transfer SD to F/O or CAPT ND.
PFD/ND XFR (if the EFIS DUs are
affected).................................................................................... USE
�� DIAGONAL LINE ON THE AFFECTED DU:
EIS DMC
SWITCHING............................................................................................................. AS
RQRD
�� If unsuccessful:
DU
(affected)..............................................................................................................OFF
THEN ON
Note: The ND display may disappear, if too many waypoints and associated
information
are displayed. Reduce the range, or deselect WPT or CSTR, and the display will
automatically recover, after about 30 s.
�� INVERSION OF THE EWD AND THE SD:
ECAM UPPER
DISPLAY .................................................................................................OFF THEN
ON
The same action on the EIS DMC SWITCHING selector produces the same effect.
ABN-31
2/2
AQU3I1CK8 R/AEF3E1RE9N/ACE3 H2A0ND/A B3O2OK1
ABNORMAL AND
EMERGENCY PROCEDURES 30 AUG 10
A318/A319/A320/A321 FLEET , ,
ECAM SINGLE DISPLAY
Only the EWD is available. There is no SD on the other DUs.
�� To call a SYS page:
PRESS AND MAINTAIN the SYS Page key on the ECP.
�� OVERFLOW ON THE STATUS Page:
PRESS AND MAINTAIN the STS key on the ECP
The first page of STATUS appears.
RELEASE IT, THEN PRESS AGAIN WITHIN 2 s
The second page of STATUS appears.
CONTINUE UNTIL THE OVERFLOW ARROW DISAPPEARS.
When the STS key is released for more than 2 s, the EWD reappears.
ABN-31
1/4
AQU3I1CK8 R/AEF3E1RE9N/ACE3 H2A0ND/A B3O2OK1
ABNORMAL AND
EMERGENCY PROCEDURES 30 AUG 10
A318/A319/A320/A321 FLEET , , , ,
DISPLAY UNIT FAILURE
Note: This Temporary Documentary Unit (TDU) is created to provide operators with
TDU example for
R0.
It does not provide operational information.
�� The DU is blank (with or without a large letter “F” in amber), or the display
is distorted:
Procedure modified for the TDU example.
�� INVALID DISPLAY UNIT message is displayed:
This may be caused by a DU failure.
FOR AUTOMATIC DU RECOVERY.................................................................
WAIT MORE THAN 40 s
�� IF DU IS AUTOMATICALLY RECOVERED:
No crew action is required.
�� IF DU IS NOT RECOVERED:
Non-recovered
DU..............................................................................................................AS RQRD
The DU can be switched off.
�� The INVALID DATA message appears (not on all DUs):
EIS DMC
SWITCHING............................................................................................................. AS
RQRD
�� If unsuccessful:
DU
(affected)..............................................................................................................OFF
THEN ON
Note: The ND display may disappear, if too many waypoints and associated
information
are displayed. Reduce the range, or deselect WPT or CSTR, and the display will
automatically recover, after about 30 s.
�� The INVALID DATA message appears on all DUs :
The autopilot, autothrust and MCDU navigation data are still available, and may be
used.
FOR AUTOMATIC DUs RECOVERY ...............................................................WAIT
MORE THAN 40 s
�� IF ALL DUs ARE AUTOMATICALLY RECOVERED:
No crew action is required.
�� IF ONE OR MORE DUs ARE NOT RECOVERED:
Non-recovered DUs....................................................................................................
OFF FOR 40 s
Non-recovered DUs........................................................................................BACK ON
sequentially
�� If the initial failure re-occurs (the INVALID DATA message appears on all
DUs), when
switching a given DU back ON:
Apply the entire procedure again, from the beginning.
Leave this specific DU permanently OFF.
�� INVERSION OF THE EWD AND THE SD:
ECAM UPPER
DISPLAY .................................................................................................OFF THEN
ON
The same action on the EIS DMC SWITCHING selector produces the same effect.
ABN-31
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A318/A319/A320/A321 QRH快速檢查單QUICK REFERENCE HAND BOOK3(64)