曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

3. PPT key  Press. List displayed
3. MNL/SLAVE switch  PRESS.
4. Using MFK, enter desired waypoint number
into list. 4. FOV SEL switch  Select desired field of
view.
5. To observe this target location, MNL/SLAVE
switch  Press. 5. LOS CONT switch  Maneuver MMS LOS to
track desired scene.
4 - 1 7 . MMS FORWARD ( F W D ) MODE 6. AREA TRK switch  Press.
OPERATING PROCEDURES.
NOTE
1. MMS key  Press.
From this mode of operation, a further
2. MMS mode select switch  FWD. selection of Acquire-on-the-Move, point
track, or a return to Manual Track may be
3. MNL/SLAVE switch  PRESS. accomplished.
4-33
TM 1-1520-248-10
4-20. MMS ACQUIRE-ON-THE-MOVE TO • To return to manual track, from any
POINT TRACK PROCEDURES. tracker mode, press MNL/SLAVE switch.
1. Area track procedures  Accomplish. 4-24. AREA TRACK PROCEDURES  IMSP/
MMS. 2. PNT TRK switch  Press.
3. LOS CONT switch  Maneuver to place 1. MMS key  Press.
acquisition box over target.
2. MMS mode select switch  FWD, PREPT, or
4. When acquisition box is centered over target, SRCH.
LOS CONT switch  Release.
3. MNL/SLAVE switch  PRESS.
5. PNT TRK switch  Press.
4. FOV SEL switch  Select field of view (wide,
wide 2X, wide 4X, narrow, narrow 2X, or
4-21. POINT TRACK PROCEDURES. narrow 4X).
1. MMS key  Press. 5. Select preferred modes (MFD keys):
2. MMS mode select switch  FWD, PREPT, or SPLT/MMS  Split screen.
SRCH. AUTOCUE ON/OFF  Display cues around
potential targets.
3. MNL/SLAVE switch  Press to enter manual FREEZE  Freeze frame. (Not an option if mode
track. select switch is set to SRCH.)
W HOT/B HOT (TIS)  Change polarity.
4. LOS CONT switch  Maneuver switch to NORM/INV (TVS)  Change polarity.
place LOS reticle over target then release.
6. LOS CONT switch  Actuate to track desired
5. PNT TRK switch  Press. scene.
4-22. OFFSET ACQUIRE PROCEDURES. 7. LOS CONT switch  Release.
1. Point track procedures  Accomplish. 8. AREA TRK switch  Press.
2. PNT TRK switch  Press. NOTE
3. LOS CONT switch  Move laser hitpoint to • From Area Track, you can go to Acquiredesired
point off target. on-the-Move, Procedure or Offset Area
Track Procedure.
4-23. OFFSET TRACK PROCEDURES. • In Area Track (if there are secondary
targets), you can move transition target
1. Point track procedures  Accomplish. gate (press TGT SEL switch) or turn
transition target into primary target and go
2. PNT TRK switch  Press. to Point Track (press PNT TRK switch).
NOTE
4-25. ACQUIRE-ON-THE-MOVE PROCEDURES
• R e t u r n t o p o i n t t r a c k m a y b e  IMSP/MMS.
accomplished by pressing PNT TRK 1. Area track or point track procedures 
switch a second time. Accomplish.
• Procedures in paragraphs 4-24 through 4-
28 are for the IMSP/MMS configuration.
4-34
TM 1-1520-248-10
2. AREA TRK switch  Press to display
acquisition cursor. 7. When LOS reticle is over target, LOS CONT
switch  Release.
3. LOS CONT switch  Actuate to place
acquisition cursor over target. 8. PNT TRK switch  Press.
4. When acquisition cursor is over target, LOS NOTE
CONT switch  Release.
• From Point Track, you can go to Acquire-
5. Repeat steps 2 through 4 to acquire more on-the-Move, Procedure or Offset Point
targets. (MMS can track up to six targets.) Track Procedure.
NOTE • In Point Track, you can move transition
target gate (press TGT SEL switch) or
turn transition target into primary target • In Acquire-on-the-Move, you can turn (press PNT TRK switch).
transition target into primary target and go
to Point Track (press PNT TRK switch).
• When Acquire-on-the-Move is entered 4-27. OFFSET POINT TRACK PROCEDURES from Point Track, you can turn transition  IMSP/MMS.
target into secondary target and return to
Point Track (press TGT SEL switch); or 1. Point track procedures  Accomplish.
when entered from Area Track, you can
return to Area Track (press TGT SEL 2. If transition target gate appears on MFD: TGT
switch). SEL switch  Press until transition target
gate disappears.
4-26. POINT TRACK PROCEDURES  IMSP/ 3. PNT TRK switch  Press to display laser hit
MMS. point reticle.
1. MMS key  Press. 4. LOS CONT switch  Actuate to place laser
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TECHNICAL MANUAL OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPT(100)