4
IMC MODE
Copyright . The Boeing Company. See title page for details.
10.12.2 June 1, 2003
Flight Instruments, Displays -Head-Up Display System -Displays
NP (TAKEOFF) MODE 1 Bank Scale and Pointer 2 Flight Mode Annunciations (FMAs)
Refer to Chapter 4, Automatic Flight, and Section 10-42, Head-Up Display System, Symbology.
3 Airspeed Indications
4 Navigation Indications
5 Attitude Indications
6 Altitude Indications
7 TCAS Resolution Advisory
8 TO/GA Pitch Target Line
9 Angle Of Attack Indications
10 Ground Localizer Line
Copyright . The Boeing Company. See title page for details.
Flight Instruments, Displays -Head-Up Display System -Displays 737 Flight Crew Operations Manual
Airspeed Indications - General
Selected Speed (all modes)
Displays target airspeed:
.
manually selected in the IAS/MACH window
.
indicates the FMC computed airspeed when the IAS/MACH window is
blank.
Speed Trend Vector (NP, AI, AII, AIII)
Tip of arrow indicates predicted airspeed in the next 10 seconds based on the current airspeed and acceleration.
Computed Airspeed (NP, AI, AII, AIII)
Indicates current computed airspeed in knots.
Displayed relative to a vertical scale along the edge of the tape and as a digital
value.
Copyright . The Boeing Company. See title page for details.
10.12.4 June 1, 2003
Flight Instruments, Displays -Head-Up Display System -Displays
737 Flight Crew Operations Manual
Maximum Speed (NP, AI, AII, AIII)
Bottom of bar indicates the maximum speed as limited by the lowest of the following:
.
Vmo/Mmo
.
landing gear placard speed
.
flap placard speed.
Inhibited on the ground.
Maximum Maneuvering Speed (NP, AI, AII, AIII)
At high altitudes and flaps up, the bottom of the bar indicates the airspeed that provides a 0.3 g maneuver margin to high speed buffet. May be displayed at high altitude with flaps up, at relatively high gross weights.
When flaps are not up, bottom of the bar indicates flap limit placard speed for the next normal flap setting. The display logic is based on a normal flap setting sequence of 1, 5, 15, 30. The bar is removed when the flap lever is moved to the landing flap selected on the APPROACH REF page or when the flap lever is moved to flaps 30 or 40.
Speed Bug (NP, AI, AII, AIII)
Points to the airspeed:
.
manually selected in the IAS/MACH window
.
indicates the FMC computed airspeed when the IAS/MACH window is
blank.
When the selected speed is off scale, the bug is parked at the top or bottom of the tape, with only one half bug visible.
Minimum Maneuver Speed (NP, AI, AII, AIII)
Top of bar indicates minimum maneuver speed.
Minimum Speed (NP, AI, AII, AIII)
Top of bar indicates the speed at which stick shaker occurs.
Inhibited on the ground.
Ground Speed (all modes)
Indicates current ground speed in one knot increments.
Copyright . The Boeing Company. See title page for details.
Flight Instruments, Displays -Head-Up Display System -Displays 737 Flight Crew Operations Manual
Airspeed Indications - Takeoff and Approach
Flaps Maneuvering Speeds (NP, AI, AII, AIII
Indicates flap maneuvering speed for the displayed flap position.
Takeoff Reference Speeds (NP, AI, AII, AIII)
Indicates V1 (decision speed) and VR (rotation speed) as selected on the CDU TAKEOFF REF page (refer to Chapter 11, Flight Management, Navigation) or as set with the speed reference selector on the engine display control panel.
VREF+15 (NP, AI, AII, AIII)
Displayed after selection of VREF.
Landing Reference Speed (NP, AI, AII, AIII)
Indicates REF (reference speed) as selected on the CDU APPROACH REF page (refer to Chapter 11, Flight Management, Navigation) or as set with the speed reference selector on the engine display control panel.
Copyright . The Boeing Company. See title page for details.
10.12.6 June 1, 2003
Flight Instruments, Displays -Head-Up Display System -Displays 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：737NG機組操作手冊Flight Crew Operations Manual FCOM 3(23)
