Copyright . The Boeing Company. See title page for details.
11.40.14 June 1, 2005
FMC Preflight
YA613, YA626, YA801 - YA809, YC411 - YD655
Page Title
The word ACT appears to the left of the title when the route has been activated and executed.
The word MOD appears to the left of the normal title when the route is modified and the change is not executed.
Multiple route pages are indicated by the page sequence number to the right of the title.
ORIGIN
Enter the ICAO airport identifier for the origin.
An entry is required for route activation.
Valid entries must be in the navigation database.
YA721, YA722
Inflight entry is inhibited for the active route. Entry of new origin erases the
previous route and can be accomplished on the active route only on the ground.
Copyright . The Boeing Company. See title page for details.
Flight Management, Navigation -FMC Preflight 737 Flight Crew Operations Manual
YA613 - YA687, YA801 - YK104
Entry is allowed for all phases of flight. Entry of a new origin erases the previous
route.
New entries on an active route display MOD in the route title.
Enables direct selection of departure and arrival procedures for the origin airport.
Automatically entered as part of a company route.
Company Route (CO ROUTE)
A company route can be called from the navigation database by entering the route
identifier. The data provided with a company route can include origin and
destination airports, departure runway, SID, and STAR, and the route of flight. All
company route data is automatically entered when the route identifier is entered.
An entry is optional for activation of the route.
Enter a company route identifier.
Valid entry is any crew entered company route name. If the name is not contained
in the NAV database, the scratchpad message NOT IN DATA BASE is displayed.
Entry of a new company route replaces the previous route.
Inflight entry is inhibited for the active route.
RUNWAY
Line title does not display until after entry of origin airport.
Enter the desired runway for the origin airport.
An entry is optional for activation of the route.
Entries must be in the navigation database.
New entries on an active route display MOD in the route title.
Can be entered from the DEPARTURES page.
Entry is deleted upon takeoff.
Destination (DEST)
Enter the ICAO airport identifier for the destination of the route.
An entry is required for route activation.
Entries must be in the navigation database.
New entries on an active route display MOD in the route title.
Enables direct selection of arrival procedures for the destination airport.
Automatically entered as part of a company route.
Copyright . The Boeing Company. See title page for details.
11.40.16 September 27, 2004
Flight Management, Navigation -FMC Preflight 737 Flight Crew Operations Manual
Entry and execution of a new destination clears any runway and runway dependent approach procedure of the previous destination. If the active leg is part of the affected procedure, then all subsequent (inactive) legs are cleared.
Flight Number (FLT NO.)
Enter the company flight number.
Entry is optional for activation of the route.
Limited to 8 characters.
Crew entered.
Flight number is included in the PROGRESS page title.
As installed:
Transponder transmits flight number to ATC.
FLT PLAN REQUEST YA613, YA626, YA801 - YA809, YC411 - YD655
Push – transmits a data link request for a flight plan route uplink
Route Page 1/X with Data Entries YA721, YA722
VIA
The VIA column displays the route segment to the waypoint or termination displayed in the TO column. Enter the path which describes the route segment between the previous waypoint and the segment termination.
Enter an airway in the VIA column and box prompts are displayed in the TO column if the previous TO line contains a waypoint on the airway.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NG機組操作手冊Flight Crew Operations Manual FCOM 3(92)
