using a floppy disk or via the PCMCIA interface to a PCMCIA card, -downloaded through ACARS in flight or on ground.

4.3.4. The Ground Support Equipment (GSE)
For the individual programming of the DMU/FDIMU functions, the DMU/FDIMU is programmable either with the assistance of an AIDS/ACMS GSE or partially through the MCDU (very limited). The GSE is a software developed by the DMU/FDIMU manufacturer. The GSE is under airline responsibility.
4.3.4.1. AIDS/ACMS reconfiguration tool The tool can be used: -to program trigger conditions, processing algorithms, layout of report formats, and the DAR & SAR recording format. -to configure the AIDS/ACMS DMU/FDIMU database -to create user programmable reports, sophisticated aircraft monitoring and data collection functions.
The program is loaded into the DMU/FDIMU on ground using the MDDU or the PCMCIA card
4.3.4.2. AIDS/ACMS readout tool It allows the operator to view the reports.
4.3.4.3. Data processing analysis
Once the in-flight data have been retrieved, they can be processed and analyzed with the APM program.
Flight Operations & Line Assistance Getting to Grips with Aircraft Performance Monitoring
HOW TO RECORD IN-FLIGHT PARAMETERS

4.3.4.4. Example of SFIM GSE – Triggering condition programming

4.4. The Cruise Performance Report
In brief, the recording systems described above produce a series of reports. Only the Cruise Performance Report or DMU/FDIMU report number <02> (CPR<02>) is of interest for aircraft performance monitoring. The present paragraph describes this particular file and may be considered as a reference.
4.4.1. General
The DMU/FDIMU is configured at the delivery of the aircraft to produce one report per hour. This may be changed via reprogramming the DMU/FDIMU via the Ground Support Equipment (GSE). It is the operator’s responsibility to update the DMU/FDIMU software.
The report <02> provides aircraft and engine data recorded in stabilized cruise. Some stability conditions and triggering conditions are mandatory so that the DMU/FDIMU can store data on the report. The stability criteria are given in this paragraph.
Flight Operations & Line Assistance Getting to Grips with Aircraft Performance Monitoring

HOW TO RECORD IN-FLIGHT PARAMETERS
The CPR<02> can be obtained:
-on a piece of paper via a printout on the cockpit printer
-in digital format (on a diskette, on the DAR optical disk (A330/A340 only), on a PCMCIA card (A320 FAM aircraft only) or via transmission by ACARS)
The advantages of automatic recording are that::
-all data required for cruise performance analysis are stored in the CPR<02> format
-the report in digital format can be used “as is” without any additional handling operations. When the report is not in a digital format, the same typing operations as in case of manual recording will have to be done by the operator.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：getting to grips with aircraft performance monitoring(37)