Config-2 Aug 01/02

 +----------------------------------------------------------------------+ |Code|Item | |Progr.|Standard | | No.|No. | Description of Function Item |MCDU |Value or | | | | |GSE |Table TXY| |----|------|-----------------------------------------|------|---------|
 |  |  | Logic based on Flight Legs: |  | |
 |  |  | |  | |
 |  |  | Every .Y02.2. flight legs the DMU search|  | |
 |  |  | in flight phase 6 for report generation |  | |
 |  |  | with stable frame criteria where the |  | |
 |  |  | best aircraft quality number QA is cal- |  | |
 |  |  | culated. The report with the best quali-|  | |
 |  |  | ty number QA is stored in the report |  | |
 |  |  | buffer. |  | |
 |  |  | |  | |
 |  |5  | The default programming is .Flight Legs.| C  | Legs |
 |  |  | |  | |
 |  |5.1  | Logic algorithm |  | |
 |  |  | |  | |
 |  |5.2  | .Y02.1. flight hours | C  | T24/T25 |
 |  |  | |  | |
 |  |5.3  | .Y02.2. flight legs | C  | T24/T25 |
 |  |  | |  | |
 |  |5.4  | .PO2. stable periods | C  | T24/T25 |
 |  |  | (5 subperiods = 100 sec) |  | |
 |  |5.5  | 78% < ACC < 100% |  | |
 |  |  | param. 7C.1.330.01 Eng.1 |  | |
 |  |  | param. 7C.2.330.10 Eng.2 |  | |
 |  |  | |  | |
 |  |  | Stable frame conditions: |  | |
 |  |  | During .P02. seconds the following |  | |
 |  |  | parameters are stable as defined below: |  | |
 |  |  | |  | |
 |  |  | The stable frame variation is customer |  | |
 |  |  | programmable, but only in the range |  | |
 |  |  | defined in the column for standard |  | |
 |  |  | values. |  | |
 |  |  | |  | |
 |  |5.6  | IALT 04.1.361.--ft | AI  | T24/T25 |
 |  |  | 04.2.361.--|  | |
 |  |  | |  | |
 |  |5.6.1 | WA of IALT | C  | T24/T25 |
 |  |  | |  | |
 |  |5.7  | GS 04.1.312.01 kts | AI  | T24/T25 |
 |  |  | 04.2.312.10 |  | |
 |  |  | |  | |
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：getting to grips with aircraft performance monitoring(89)