Message Annunciator: On,
Page Indicator (NAV/ Source: GPS
Navigation
WPT/AUX/NRST/FPL/ or VLOC
DRCT/PROC/MSG), Waypoint Alert (‘NEXT Integrity Failure or DTK’), or Turn Advisory Position Warning (‘TURN TO’_), etc.
(‘WARN’) Annunciator
(RAIM protection limit failure)

to view a LiSt of NeaReSt aiRpoRtS

1)  Turn the large right knob to select the NRST Page Group. ‘NRST’ will appear in the lower right corner of the screen. 
2)  If necessary, turn the small right knob to select the Nearest Airport Page. 

to SCRoLL thRoUGh the LiSt of

NeaReSt aiRpoRtS 
1)  Press the small right knob to activate the cursor. 
2)  Turn the large right knob to scroll through the list. The scroll bar along the right-hand side of the page will indicate which part of the list is currently being viewed. 
3)  To remove the flashing cursor, press the small right knob. 

to view additioNaL iNfoRmatioN foR a

NeaRby aiRpoRt 
1)  Highlight the identifier of the desired airport by scrolling through the list, as described in the preceding procedure. 
2)  Press the ENT Key to display the Airport Location Page for the selected airport. 

3)  To view additional WPT pages for the selected airport (including the airport runway and airport frequency pages), press the small right knob to remove the flashing cursor. Turn the small right knob to display the additional WPT pages. When finished, press the small right knob to return the flashing cursor to the screen.

to SeLeCt a NeaRby aiRpoRt aS a

diReCt-to deStiNatioN 
1)  Press the Direct-to Key. The Select Direct-to Waypoint Page appears, with the waypoint identifier field highlighted. 
2)  Turn the large right knob to highlight the nearest airport (NRST) field. 
3)  Turn the small right knob to display a window showing up to nine nearby airports. 

4)  Continue turning the small right knob to scroll through the list and highlight the desired airport. 
5)  Press the ENT Key to confirm the selected airport. Press the ENT Key again (with ‘Activate?’ highlighted) to activate the direct-to function. 

to CReate a New fLiGht pLaN

1)  Press the FPL Key and turn the small right 
knob to display the Flight Plan Catalog Page. 
2)  Press the meNU Key to display the Flight Plan 
Catalog Page Menu. 
3)  Turn the large right knob to highlight ‘Create 
New Flight Plan?’ and press the ENT Key. 

5)  Repeat step 4 above to enter the identifier for each additional flight plan waypoint. 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：GNS 430/430A Quick Reference 快速參考(8)