to NaviGate a fLiGht pLaN

1)  Press the FPL Key and turn the small right 
knob to display the Flight Plan Catalog Page. 
2)  Press the small right knob to activate the 
cursor. 
3)  Turn the large right knob to highlight the 
desired flight plan and press the MENU Key to 
display the Flight Plan Catalog Page Menu. 
4)  Turn the large right knob to highlight ‘Activate 
Flight Plan?’ and press the ENT Key. 

to Stop NaviGatiNG a fLiGht pLaN

1)  Press the FPL Key 
2)  Press the MENU Key to display the Flight Plan 
Catalog Page Menu. 
3)  Turn the large right knob to highlight ‘Delete 
Flight Plan?’, and press the ENT Key. 

to edit a fLiGht pLaN

1)  Press the FPL Key and turn the small right 
knob to display the Flight Plan Catalog Page. 
2)  Press the small right knob to activate the 
cursor. 
3)  Turn the large right knob to highlight the 
desired flight plan and press the ENT Key. 
4)  To add a waypoint to the flight plan: Turn the 
large right knob to select the point to add 
the new waypoint. (If an existing waypoint is 
highlighted, the new waypoint is placed directly 
in front of this waypoint.) 

a) Use the small and large right knobs to enter the identifier of the new waypoint and press the ENT Key.
5)  To delete a waypoint from the flight plan:Turn the large right knob to select the waypoint to be deleted and press the CLR Key to display a ‘remove waypoint’ confirmation window.
a) With ‘Yes’ highlighted, press the ENT key to remove the waypoint.
6)  Once all changes have been made, press the small right knob to return to the Flight Plan Catalog Page.

to SeLeCt aN appRoaCh
1)  Press the PROC Key to display the Procedures Page.
2)  Turn the large right knob to highlight ‘Select Approach?’ and press the ENT Key.

4)  A second window appears listing the available transitions. Turn the large right knob to highlight the desired transition waypoint and press the ENT Key. (The approach ‘Vectors’ option assumes the pilot will receive vectors to the final course segment of the approach and will provide navigation guidance relative to the final approach course.)

5)  Turn the large right knob to highlight ‘Load?’ or ‘Activate?’ and press the ENT Key. (‘Load?’ adds the procedure to the flight plan without immediately using it for navigation guidance. This allows the pilot to continue navigating the original flight plan, but keeps the procedure available on the Active Flight Plan Page for quick activation when needed.)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：GNS 430/430A Quick Reference 快速參考(9)