曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

                                    xcr : -CDa
                                                           Cx0 - -CL COS 0o
                                        Cxct - -CDd - 0
                                         Cxq = -CDq - 0
                                 Czu = -2CL - CLu - 2tTl,iqo
                                    zct : -Cln
                                      zd - -CLdt
                                     Czq = -CLq
                                              Cz8 - -CL siri0o
The expressions for other lateral-directional stability derivatives essentially remain
the same as those derived earlier for steady ffight. However, we have to note that
EQUATIONS OF MOTION AND ESTIMATION OF STABILITY DERIVATIVES 389
all the stability derivatives have to be evaluated for curved flow conditions to sim-
ulate the steady pull- out maneuver prior to disturbance. However, if qo iS small,
for approximate purposes, the curved flow effects can be ignored, and relations
derived for steady flightin a vertical plane can be used with one difference that Cma,
should be evaluated considering the increase in stability level during the pull- out
maneuver.
4.4 '  Estimation of Stability Derivatives
   To solve motion Eqs. (4.417-4.419) and (4.459-4.461) for studying the stabil-
ity (free response) or the response of the airplane to a given pilot input (forced
response), we need to know the values of all the static and dynamic stability deriva-
tives appearing in those equations. These derivatives can be determined either by
analytical, serniempirical, computational fluid dynamics (CFD), or experimental
methods. The analytical methods based on classical aerodynamic theories can be
applied only to idealized wings and bodies. Aircraft configurations ofpractical in-
terest cannot be analyzed using the classical aerodynamic theories.ln view of this
difficulty, several empiricaVsemiempirical methods have been developed over the
years for evaluating the stability and control derivatives of aircraft configurations
of practical interest. Datcom is one of the most widely used sources for estimat-
ing aircraft stability and control derivatives.7 It is a comprehensrve compilation
of all the available engineering methods for obtai:rung the stability and control
derivatives of airplane- type configurations.
    The modern CFD methods are capable ofproviding more accurate estimates of
static and some dynamic derivatives. But, at present, the level of effort imtolved
precludes their application at preliminary design stages. In view of this, the CFD
methods are usually used at a sufficiently later stage in the velucle design process
when the configuration takes its final form.
        The experimental methods for obtaining dynamic stability derivatives in ground-
based test facilities8-10 mainly consist ofeither forced oscillation or free oscillation
technique wherein the test model undergoes an oscillatorjr motion in pitch, roll, or
yaw. Another approach that is often used to obtain dynamic stability derivatives
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：PERFORMANCE, STABILITY, DYNAMICS, AND CONTROL2(144)