曝光臺 注意防騙
網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者
7-7-51
Figure 7-7-45. 98 and 100% Rotor RPM, –20C, 10,000 Feet
TM 1-1520-240-10
7-7-52
Figure 7-7-46. 100% Rotor RPM, –10 and 0C, 10,000 Feet
TM 1-1520-240-10
7-7-53
Figure 7-7-47. 100% Rotor RPM, 10 and 20C, 10,000 Feet
TM 1-1520-240-10
7-7-54
Figure 7-7-48. 100% Rotor RPM, 30 and 40C, 10,000 Feet
TM 1-1520-240-10
7-7-55
Figure 7-7-49. 100% Rotor RPM, 50C, 10,000 Feet
TM 1-1520-240-10
7-7-56
Figure 7-7-50. 98 and 100% Rotor RPM, –50C, 12,000 Feet
TM 1-1520-240-10
7-7-57
Figure 7-7-51. 98 and 100% Rotor RPM, –40C, 12,000 Feet
TM 1-1520-240-10
7-7-58
Figure 7-7-52. 98 and 100% Rotor RPM, –30C, 12,000 Feet
TM 1-1520-240-10
7-7-59
Figure 7-7-53. 98 and 100% Rotor RPM, –20C, 12,000 Feet
TM 1-1520-240-10
7-7-60
Figure 7-7-54. 100% Rotor RPM, –10 and 0C, 12,000 Feet
TM 1-1520-240-10
7-7-61
Figure 7-7-55. 100% Rotor RPM, 10 and 20C, 12,000 Feet
TM 1-1520-240-10
7-7-62
Figure 7-7-56. 100% Rotor RPM, 30 and 40C, 12,000 Feet
TM 1-1520-240-10
7-7-63
Figure 7-7-57. 100% Rotor RPM, 50C, 12,000 Feet
TM 1-1520-240-10
7-7-64
Figure 7-7-58. 98 and 100% Rotor RPM, -50C, 14,000 Feet
TM 1-1520-240-10
7-7-65
Figure 7-7-59. 98 and 100% Rotor RPM, –40C, 14,000 Feet
TM 1-1520-240-10
7-7-66
Figure 7-7-60. 98 and 100% Rotor RPM, –30C, 14,000 Feet
TM 1-1520-240-10
7-7-67
Figure 7-7-61. 98 and 100% Rotor RPM, –20C, 14,000 Feet
TM 1-1520-240-10
7-7-68
Figure 7-7-62. 100% Rotor RPM, –10 and 0C, 14,000 Feet
TM 1-1520-240-10
7-7-69
Figure 7-7-63. 100% Rotor RPM, 10 and 20C, 14,000 Feet
TM 1-1520-240-10
7-7-70
Figure 7-7-64. 100% Rotor RPM, 30 and 40C, 14,000 Feet
TM 1-1520-240-10
7-7-71
Figure 7-7-65. 100% Rotor RPM, 50C, 14,000 Feet
TM 1-1520-240-10
7-7-72
Figure 7-7-66. 98 and 100% Rotor RPM, –50C, 16,000 Feet
TM 1-1520-240-10
7-7-73
Figure 7-7-67. 98 and 100% Rotor RPM, –40C, 16,000 Feet
TM 1-1520-240-10
7-7-74
Figure 7-7-68. 98 and 100% Rotor RPM, –30C, 16,000 Feet
TM 1-1520-240-10
7-7-75
Figure 7-7-69. 98 and 100% Rotor RPM, –20C, 16,000 Feet
TM 1-1520-240-10
7-7-76
Figure 7-7-70. 100% Rotor RPM, –10 and 0C, 16,000 Feet
TM 1-1520-240-10
7-7-77
Figure 7-7-71. 100% Rotor RPM, 10 and 20C, 16,000 Feet
TM 1-1520-240-10
7-7-78
Figure 7-7-72. 100% Rotor RPM, 30 and 40C, 16,000 Feet
TM 1-1520-240-10
7-7-79
Figure 7-7-73. 98 and 100% Rotor RPM, –50C, 18,000 Feet
TM 1-1520-240-10
7-7-80
Figure 7-7-74. 98 and 100% Rotor RPM, –40C, 18,000 Feet
TM 1-1520-240-10
7-7-81
Figure 7-7-75. 98 and 100% Rotor RPM, –30C, 18,000 Feet
TM 1-1520-240-10
7-7-82
Figure 7-7-76. 98 and 100% Rotor RPM, –20C, 18,000 Feet
TM 1-1520-240-10
7-7-83
Figure 7-7-77. 98 and 100% Rotor RPM, –10 and 0C, 18,000 Feet
TM 1-1520-240-10
7-7-84
Figure 7-7-78. 98 and 100% Rotor RPM, 10 and 20C, 18,000 Feet
TM 1-1520-240-10
7-7-85
Figure 7-7-79. 98 and 100% Rotor RPM, –50C, 20,000 Feet
TM 1-1520-240-10
7-7-86
Figure 7-7-80. 98 and 100% Rotor RPM, –40C, 20,000 Feet
TM 1-1520-240-10
7-7-87
Figure 7-7-81. 98 and 100% Rotor RPM, –30C, 20,000 Feet
TM 1-1520-240-10
7-7-88
Figure 7-7-82. 98 and 100% Rotor RPM, –20C, 20,000 Feet
TM 1-1520-240-10
7-7-89
Figure 7-7-83. 100% Rotor RPM, –10 and 0C, 20,000 Feet
TM 1-1520-240-10
7-7-90
Figure 7-7-84. 100% Rotor RPM, 10 and 20C, 20,000 Feet
TM 1-1520-240-10
7-8-1
SECTION VIII. DRAG
7-8-1. Description.
The drag chart (fig. 7-8-1) shows the torque change required
for flight due to drag area change as a result of
external configuration changes.
7-8-2. Use of Charts.
The primary use of the chart is illustrated by the example.
To determine the change in torque, it is necessary to
know the drag area change, TAS, PA, and FAT. From the
table below find the drag area change associated with
the configuration, or estimate if necessary. Enter chart
at known drag area change, move right to TAS, move
down to PA, move left to FAT, then move down and read
change in engine torque.
7-8-3. Conditions.
The drag chart is based on operating at 100% RRPM.
Table 7-8-1. Change in Drag Area of Typical External
Loads
LOAD
DRAG
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：
支奴干運輸直升機操作手冊2(12)
