曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Preset Channel WOD Segment Common Net
20 300.050 300.000
19 376.000 300.000
18 359.100 300.000
17 314.300 300.000
16 297.600 300.000
15 287.400 300.000
3-18.8 Change 3
TM 1-1520-238-10
6. Function Selector switch - PRESET. 4.
7. CHAN switch - Set to Channel 20.
8. LOAD button - Lift preset frequency label
cover and push LOAD button. l
Repeat steps 5 through 8, setting channels 19 through
15 in order, substituting Training/Maintenance WOD
for existing preset channels. After preset channel 15
frequency has been entered, the WOD must be initialized.
l
3.78.5 Initializing the Word Of Day (WOD).
NOTE
If power is lost, or if preset channel 20 is
selected when the MANUAL-PRESETGUARD
switch is in the PRESET position,
the initialize procedure will be required
again. To use this WOD, a TOD
and NET must be entered.
5.
6.
7.
8.
1.
2.
3.
4.
CHAN switch - Set to Channel 20. A single
beep should be heard.
CHAN switch - Set to Channel 19. A single
beep should be heard.
CHAN switch - Set to Channel 18. A single
beep should be heard.
CHAN switch - Set to Channel 17. A single
beep should be heard.
NOTE
If TOD is being automatically beaconed
from another station, the first TOD message
received within one minute of selected
T position will be accepted.
5. CHAN switch - Set to Channel 16. A single
beep should be heard.
6. CHAN switch - Set to Channel 15. A double
beep should be heard.
7. Function Selector switch - MNL. This will
prevent accidental erasure of the initialized
WOD.
3.78.6 Multiple Word Of Day (MWOD) Loading.
1. CHAN switch - Set to Channel 20.
2. Function Selector switch - PRESET.
3. Frequency switches - Set to 220.025 (MWOD
LOAD).
LOAD button - Lift preset frequency label
cover and push LOAD button. Listen for
single beep.
NOTE
If radio is now in the MWOD load mode.
M-LOAD will be displayed on the frequency/
status indicator for five seconds
by pressing the STATUS switch.
The radio will transmit and receive in
the VERIFY/OPERATE mode only.
The radio is disabled and will not transmit
or receive in the M-LOAD,
ERASE, or FMT.CHG modes.
Function Selector switch - MNL.
CHAN switch - Set to Channel 20.
Frequency switches - Set to the first WOD
element.
T-TONE switch - Toggle to TONE and release.
Listen for a wavering tone. The first
WOD element is now entered.
Repeat steps 5 thru 8 for presets 19 thru 15, in that order,
substituting WOD elements for existing preset
channels.
9. CHAN switch - Set to Channel 14.
NOTE
l If two or more WODs have the same
date code, the radio recognizes only the
latest date entered.
l
10.
11.
MWODs must be linked with an
associated day-of-month code. This
date code element has been added to every
operational and training segment
in HAVE QUICK and need only be
loaded when MWOD is used.
Frequency switches - Set to the applicable
day of the month code. Code format is
XAB.XXX, where A and B are the day of the
month the WOD is used. X can represent any
value. For example, if today were 26 June,
then select 226.025 or 326.475.
T-TONE switch - Toggle to TONE and release.
Listen for a double beep. One complete
WOD is now loaded. To load more WODs, repeat
steps 5 thru 11.
NOTE
The operational date is the current Day of
Month and must be entered into Channel
1 so the radio can select the proper WOD.
Change 4 3-18.9
TM 1-1520-238-10
12. CHAN switch - Set to Channel 01.
13. Frequency switches - Set to the current Day
of Month code. Code format is XAB.XXX,
where A and B are the day of the month the
WOD is used.
14. T-TONE switch - Toggle to TONE and release.
Listen for a wavering tone.
15. Function Selector switch - PRESET.
16. CHAN switch - Set to Channel 20.
17. Frequency switches - Set to 220.000 MHz
(Verify/Operate).
18. LOAD button - Lift preset frequency label
cover and push LOAD button. Listen for
single beep. Radio is now ready to receive
TOD and then operate in the active mode.
3.7B.7 MWOD Loading using KYK-13 Keyfill Device
The KYK-13 has six channels and can hold up to six
WODs. MWOD keying is supplied through cryptologic
sources. Load the radio as follows:
1. STATUS button - Press; ensure the frequency/
status LCD displays VER/OP.
2. Function Selector switch - MNL.
3. Preset Frequency Label Cover - Lift to reveal
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：阿帕奇攻擊直升機操作手冊1(71)