曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
35/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
General Visual Inspection Aircraft Servicing - Maintenance
- Overhaul - Repair
A visual examination of an interior or exterior area, installation or assembly to
detect obvious damage, failure or irregularity. This level of inspection is made
from within touching distance unless other specified. A mirror may be
necessary to enhance visual access to all exposed surfaces in the inspection
area. This level of inspection is made under normally available lighting
conditions such as daylight, hangar lighting, flashlight or drop-light and may
require removal or opening of access panels or doors. Stands, ladders or
platforms may be required to gain proximity to the area being checked.
ATA MSG-3
Generic Part of a
Courseware
Training It is the set of Computer-Based Training (CBT) modules impacted only with
aircraft standard modifications or major options (engines, Units). This part can
be delivered to several customers without any modifications.
GIE Organization/Airbus "Groupement d'Intérêt Economique" a legal entity governed by a French
Ordonnance N° 67-821 dated September 23, 1967.
Global RFC Aircraft Definition
Evolution/Definition Evolution
Procedure
Document which lists several Customer originated changes.
Glossary Common Terms/Basic Terms A collection of terms limited to a special area of knowledge (eg: technical or
usage: dialectical words).
WD
Green Aircraft Aircraft Identification Aircraft with sufficient equipment for safe operation but without passenger
compartment furnishings and most of the associated equipment and
electronics. It may also have standard exterior paintwork with only the
manufacturer's name and serial number displayed.
Ground Support Equipment Common Terms/Basic Terms Equipment required on the ground to support the operation and maintenance of
the aircraft and all its airborne equipment.
WATOG
Group Organization/Airbus - Aircraft
Buyer Relationships
Association of Airlines.
Guidance Material Certification Helps to illustrate the meaning of a specification or requirement. EASA
Guide Organization/Management Direct in a way ; conduct. WD
Hand-Out Training Prepared paper document issued to trainees for specific complementary
technical information.
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
36/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Handover to AIB Planning No longer to be used.
Milestone in the Aircraft production.
Official session which takes place at the end of the Aircraft assembly to
compare the Aircraft status with its definition. At the end, the Aircraft is
accepted or not by AIB. When the aircraft is accepted by the Flight Test
organization it is under the responsibility of that organization.
Handover to Programs Planning Milestone in the Aircraft production. Official session which takes place at the
end of the Aircraft assembly to compare the Aircraft status with its definition. At
the end, the Aircraft is accepted or not by Programs. When the aircraft is
accepted by the Flight Test organization it is under the responsibility of that
organization.
Hardcore Fleet Aircraft Identification A hardcore fleet covers the basic configuration of all aircraft of the Leasing
Company.
ACMR
Highlight Code Customer Services/Contractual
Technical Publications
A numeric code identifying the reason for change within a manual for automatic
inclusion in the highlights list when an electronic publishing system is used.
eg: 01 = Modification XXXXX incorporated,
eg: 09 = Layout improved/material relocated.
AMM, ASM, TSM and AWM
Highlights Customer Services/Contractual
Technical Publications
List at the front of a manual/chapter specifying the changes for a given revision
with a reason for each change.
Illustrated Provisioning
Document
Customer Services/Spares The IPD provides illustrations (Part 1) and parts list (Part 2) covering units and
components/Line Replaceable Units (LRUs) installed on the aircraft and is used
during the initial provisioning period until the customized Illustrated Parts
Catalog (IPC) is available.
Implement Organization/Management
Implementation
To fulfill, perform. WD
Improvement Manufacturer
Program for Airbus
Customer Training
Training Airbus Customer Training's strategy to improve the dispatch reliability factor at
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：空客縮略語Airbus Reference Language Abbreviations (Approved(63)