曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Page 32
- code of the airport)
se button.
d
AirNav® Systems
AirNav RadarBox 2008 Manual
Click on the Setup button to open the Fleet Watch Setup input window. Individual aircraft registrations, or airline ID can
be entered with "*" being used as a wildcard to allow groups of aircraft to be seen. Click Apply Changes to activate. When
the SmartView tab is selected (see above) only those aircraft that meet the criteria in the Fleet Watch Setup window will
show in the Fleet Watch aircraft list. It you sele
filtered out
– World Leader in Flight Tracking and Monitoring
www.airnavsystems.com
dcard select Show Only Feet Watch Flights on Map, then all other flights will be
Page 33
ct
AirNav® Systems
AirNav RadarBox 2008 Manual
METAR, TAF and Auto QNH Settings
Also available at the top of the SmartView window, is the Select Airport option. This allows weather for a specific airfield
to be displayed and for the map to be centered on that airfield. The QNH (atmospheric pressure at airfield level, adjusted
to mean sea level) can also be set for the selected airfield.
3.9. Flight Data Recorder/Playback
Flight Data Recorder / Playback
– World Leader in Flight Tracking and Monitoring
www.airnavsystems.com
played rder Page 34
AirNav® Systems
AirNav RadarBox 2008 Manual
The flight data recorder feature enables you to record and playback flight movement files. This feature is accessible on
the File menu.
Flight data files contain a Mode-S message on each line. Their extension is .rbl.
Data on each line is in comma-separated format and has the following fields:
 $PTA: Always present and identifies a mode
 Date/Time in format yyyymmddhhnnss
 Mode S HEX Code
 Callsign
 Altitude in feet
 Groundspeed
 Track
 Vertical Rate in feet per minute
 Airspeed
 Latitude
 Longitude
Examples:
$PTA,20070516163432224,40056E,TOM287Q,,,,,,,,,,,,,
$PTA,20070516163432739,C076F0,,39000,,,,,38.9736,
$PTA,20070516163420739,C076F0,FCA923C,,,,,,,,,,,,,
$PTA,20070516163420802,495288,,,231.5,328.8,
3.10. Monitor Airport Movements
Monitor Airport Movements
It is simple to monitor all arrivals and departures to or from a specified airport.
1- On the Filters toolbar (shown below) enter the code of the airport you want to monitor in the Airport box.
If you do not know the code, click the '...' button to specify the airport by name.
2- Click on the "Airport" button. It will now remain checked.
Flights to the selected Airport will show green. Flights from the selected airport will show red.
3- If at anytime you want to monitor all the airspace again, click the "Airport" button to uncheck it.
4- The "Origin" and "Destination" buttons can be used in the same way to view specific flights to and from an airport.
Note: Not all flights have a route displayed. The
route details.
– World Leader in Flight Tracking and Monitoring
www.airnavsystems.com
mode-s message
63432224,40056E,38.9736,-8.3035,A,,,,,
231.5,328.8,-2432,,,,,,,,,
Monitor Airport Movements function will not work for flights without
Page 35
AirNav® Systems
AirNav RadarBox 2008 Manual
– World Leader in Flight Tracking and Monitoring
www.airnavsystems.com
Page 36
AirNav® Systems
AirNav RadarBox 2008 Manual
3.11. Connecting to AirNav ACARS Decoder
Connecting to AirNav ACARS Decoder
Introduction
AirNav RadarBox can work in conjunction with Air
AirNav). This way you will be able see ACARS messages for the flights you are tracking. AirNav RadarBox is the first
radar decoder application ever to have an ACARS interface included. Data i
AirNav RadarBox using a simple Windows DDE (Dynamic Data Exchange) interface. Select 'Connect to AirNav ACARS
Decoder' in the RadarBox ACARS window.
– World Leader in Flight Tracking and Monitoring
www.airnavsystems.com
AirNav ACARS Decoder (Decoder is a separate program available from
is passed from AirNav ACARS Decoder to
Page 37
Nav s
AirNav® Systems
AirNav RadarBox 2008 Manual
For more information on ACARS please read the bottom of this topi
Connecting to AirNav ACARS Decoder
When you start AirNav RadarBox it will detect if AirNav ACARS Decoder is running and if that is the case, connect to it
automatically. If ACARS Decoder was started after RadarBox, then Select 'Connect to AirNav ACARS
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：AirNav RadarBox 2008 Manual(13)