曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

STAN Specifications) are approved by Rolls-Royce, subject to
limitations stated:
1. Corrosion Inhibitor/Lubricity Aids:
Concentration Range:
lb/42,035 US Gallons lb/35,000 IMP Gallons
Fuel Additive Minimum Maximum
APOLLO PRI 19 3 (9 mg/liter) 8 (23 mg/liter)
DUPONT DCI-4A 3 (9 mg/liter) 8 (23 mg/liter)
HITEC 580 3 (9 mg/liter) 8 (23 mg/liter)
HITEC 515 4 (11 mg/liter) 7.5 (21 mg/liter)
TOLAD 245 7.5 (21 mg/liter) 12 (34 mg/liter)
NOTE: Minimum requirement is to ensure that sufficient additive is available
when it is required to act as a lubricity aid.
2. Anti-Icing Additive:
DEF STAN 68-252 or MIL-I-27686E, or any direct equivalent in
concentrations not exceeding 0.15 percent by volume.
3. Static Dissipator Additive:
A. Shell A.S.A. 3 in concentrations of not more than 1.00 part per
million.
B. Stadis 450 maximum concentration not more than 3.00 parts
per million.
4. Anti-Microbiological Additive:
A. Methyl Cellosolve may be used. Refer to GIV Maintenance
Manual, Chapter 28 for additive application procedures.
B. Biobor JF may be used. Refer to GIV Maintenance Manual,
Chapter 28 for additive application procedures.
C. Kathon FP 1.5 may be used. Refer to GIV Maintenance Manual,
Chapter 28 for additive application procedures.
NOTE: Under certain conditions solid matter may be precipitated
from fuel containing Biobor JF or Kathon FP 1.5 during flight. The fuel
differential pressure signals should be carefully monitored in flight
immediately following its use in the airplane tanks. See Rolls Royce
Tay Maintenance Manual M-TAY-1RR for recommended procedures
to be followed when using Biobor JF or Kathon FP 1.5.
Quick Reference Handbook
REVISION 7 NORMAL PROCEDURES
May 30/02 Page NI -11
Oil Grades: Engine / Starter / APU AFM 1-12-50
WARNING: LUBRICATING OIL IS TOXIC TO SKIN, EYES, AND
RESPIRATORY TRACT. SKIN AND EYE PROTECTION IS REQUIRED.
AVOID REPEATED OR PROLONGED CONTACT. USE IN A WELL
VENTILATED AREA.
CAUTION: USE ONLY BRAND NAMES SPECIFICALLY AUTHORIZED.
USE OF ANY UNAPPROVED OIL REQUIRES AUTHORIZATION OF
EQUIPMENT MANUFACTURER.
NOTE: Mixing of oils is not recommended but brands may be mixed if
operationally essential. Complete drainage of one oil and replacement with a
different brand is not considered mixing of oils.
Oil of the brands below, when reclaimed to approved Rolls-Royce
standards for appropriate viscosity grade, are approved for use in the
TAY engine.
The following oils are approved for common usage in the engine and
APU:
3 Centistoke Oils 5 Centistoke Oils
Aeroshell Turbine Oil 390 Royco/Aeroshell Turbine Oil 500
Castrol 3C Gas Turbine Oil Aeroshell Turbine Oil 560
Castrol 325 Gas Turbine Oil Castrol 5000 Gas Turbine Oil
Esso / Exxon Turbo Oil 2389 Esso / Exxon Turbo Oil 2380
Mobil Jet II
Mobil 254
Refer to the following manuals for oils approved for specific usage in
the engine, starter or APU:
• ENGINE: U.K. CAA Approved Rolls-Royce Tay Operating
Instructions (F-TAY-1RR) and associated Service Bulletins
• STARTER: Garrett Starter Maintenance Manual 80-10-53
• APU: Garrett Maintenance Manual No. 49-21-89 for APU
Model No. GTCP36-100(G)
Quick Reference Handbook
NORMAL PROCEDURES REVISION 7
Page NI - 12 May 30/02
Conversion Tables
For Length Conversions:
Multiply: By: To Obtain:
Feet 0.3408 Meters
Meters 3.281 Feet
Statute Miles 5,280 Feet
Statute Miles 0.8684 Nautical Miles
Statute Miles 1.609 Kilometers
Nautical Miles 6,080.27 Feet
Nautical Miles 1.1516 Statute Miles
Nautical Miles 1.853 Kilometers
Kilometers 3,281 Feet
Kilometers 0.5396 Nautical Miles
Kilometers 0.6214 Statute Miles
Centimeters 0.3937 Inches
Inches 2.54 Centimeters
For Pressure Conversions:
Multiply: By: To Obtain:
Hectopascals (MB) 0.0295 Inches of Mercury
Inches of Mercury 33.86 Hectopascals (MB)
For Volume Conversions:
Multiply: By: To Obtain:
U.S. Gallons 0.83267 Imperial Gallons
U.S. Gallons 3.785 Liters
Imperial Gallons 1.20095 U.S. Gallons
Imperial Gallons 4.546 Liters
Liters 0.2642 U.S. Gallons
Liters 0.2200 Imperial Gallons
For Weight Conversions:
Multiply: By: To Obtain:
Kilograms 2.205 Pounds
Pounds 0.4536 Kilograms
Metric Tons 2205 Pounds
Metric Tons 1000 Kilograms
For Density Conversions:
Multiply: By: To Obtain:
Kilograms / Liter 5.346 Pounds / Gallon
Pounds / Gallon 0.1198 Kilograms / Liter
Quick Reference Handbook
REVISION 7 NORMAL PROCEDURES
May 30/02 Page NI -13
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：灣流4快速檢查單QRH GULFSTREAM IV QUICK REFERENCE HANDBOOK 1(35)