曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

ICAO Contracting States, in their effort to establish and implement an effective safety oversight system, need to consider the critical elements for safety oversight (CE). Critical elements are essentially the safety defence tools of a safety oversight system and are required for the effective implementation of safety-related policy and associated procedures. States are expected to implement safety oversight critical elements in a way that assumes the shared responsibility of the State and the aviation community. Critical elements of a safety oversight system encompass the whole spectrum of civil aviation activities, including areas such as aerodromes, air traffic control, communications, personnel licensing, flight operations, airworthiness of aircraft, accident/incident investigation, and transport of dangerous goods by air. The effective implementation of the CE is an indication of a State’s capability for safety oversight.
ICAO has identified and defined the following critical elements of a State’s safety oversight
system: 
CE-1.  Primary aviation legislation. The provision of a comprehensive and effective aviation law consistent with the environment and complexity of the State’s aviation activity and compliant with the requirements contained in the Convention on International Civil Aviation. 
CE-2.  Specific operating regulations. The provision of adequate regulations to address, at a minimum, national requirements emanating from the primary aviation legislation and providing for standardized operational procedures, equipment and infrastructures (including safety management and training systems), in conformance with the Standards and Recommended Practices (SARPs) contained in the Annexes to the Convention on International Civil Aviation. 

Note.— The term “regulations” is used in a generic sense to include but is not limited to instructions, rules, edicts, directives, sets of laws, requirements, policies, and orders.
CE-3.  State civil aviation system and safety oversight functions. The establishment of a Civil Aviation Authority (CAA) and/or other relevant authorities or government agencies, headed by a Chief Executive Officer, supported by the appropriate and adequate technical and non-technical staff and provided with adequate financial resources. The State authority must have stated safety regulatory functions, objectives and safety policies.
Note.— The term “State civil aviation system” is used in a generic sense to include all aviation-related authorities with aviation safety oversight responsibility which may be established by the State as separate entities, such as: CAA, airport authorities, air traffic service authorities, accident investigation authority, and meteorological authority.
CE-4.  Technical personnel qualification and training. The establishment of minimum knowledge and experience requirements for the technical personnel performing safety oversight functions and the provision of appropriate training to maintain and enhance their competence at the desired level. The training should include initial and recurrent (periodic) training.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：ICAO Doc 9735 Safety Oversight Audit Manual(44)