曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

OUTFLOW VALVE LRUs
IDENTIFICATION
FIN: 10HL
LOCATION
ZONE: 172
COMPONENT DESCRIPTION
The skin mounted outflow valve is of the dual-gate and
motor driven type design.
It consists of:
- a valve assembly (a frame and two gates),
- two electronic actuators (a single electronic
board connected to its associated CPC via RS422
bus),
- a gearbox assembly (two automatic motors, a
manual motor, a gearbox and feedback
assembly).
VALVE ASSEMBLY
The outflow valve body has two gates, one forward and
one aft. The gates are installed in a rectangular
frame. The forward gate opens outwards and is
mechanically connected to the aft gate. The aft gate
opens inwards and is mechanically connected to the
gear box and the forward gate.
ELECTRONIC ACTUATORS
The electronic actuator modules receive a position
reference signal (desired outflow valve position) from
the controller. This signal is compared with the
outflow valve actual position. The electronic module
then drives the outflow valve until its position
matches the desired one.
A pressure switch is installed in each box. It operates
independently from the automatic operation. It closes
the outflow valve if the pressure in the fuselage is
less than the atmospheric pressure at an altitude of
15000 ft.
GEARBOX AND FEEDBACK ASSEMBLY
The gearbox transmits the movement from the activated
motor to the outflow valve flap. A mechanical stop
limits the rotation of the drive shaft for the valve
flap movement. The feedback module is a triple
potentiometer integrated with the gearbox. It sends
data to the cabin pressure controllers.
There are two brushless DC motors for automatic
control. Each motor has an integral electromechanical
brake. The manual motor is a brush-type DC motor. It
drives the outflow valve through an irreversible
worm-gear.
TMUPREE0A-T02 LEVEL 3
EFFECTIVITY 21-31-00 Page 4
Jul 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 21 AIR CONDITIONING
UF94200
EFFECTIVITY Page 192
ALL
PRESSURIZATION - COMPONENTS - OUTFLOW VALVE
TMUPREE0A-P02 LEVEL 3
EFFECTIVITY 21-31-00 Page 5
Jul 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 21 AIR CONDITIONING
UF94200
EFFECTIVITY Page 193
ALL
PRESSURIZATION - COMPONENTS
SAFETY VALVES
IDENTIFICATION
FIN: 6HL, 7HL
LOCATION
ZONE: 262
COMPONENT DESCRIPTION
The safety valve is of the diaphragm pneumatic valve
type and consists of:
- a body, a filter, a moving valve element
(diaphragm).
- a pneumatic pressure controller sensing cabin
and outside pressures
- a position switch for ECAM indication.
Opening: when DP = 8.6 or - 0.5 psi.
TMUPREE0A-T03 LEVEL 3
EFFECTIVITY 21-31-00 Page 6
Jul 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 21 AIR CONDITIONING
UF94200
EFFECTIVITY Page 194
ALL
PRESSURIZATION - COMPONENTS - OUTFLOW VALVE SUB-COMPONENTS
TMUPREE0A-P03 LEVEL 3
EFFECTIVITY 21-31-00 Page 7
Jul 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 21 AIR CONDITIONING
UF94200
EFFECTIVITY Page 195
ALL
THIS PAGE INTENTIONALLY LEFT BLANK
TMUPREE0A LEVEL 3
EFFECTIVITY 21-31-00 Page 8
Jul 31/00
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 21 AIR CONDITIONING
UF94200
EFFECTIVITY Page 196
ALL
21 - AIR CONDITIONING
21-31-00 PRESSURIZATION -
FUNCTIONAL TEST OF MAN MOTOR
CONTENTS:
Aircraft configuration
Procedure
TMUPREH01 LEVEL 3
EFFECTIVITY 21-31-00 Page 1
Sep 30/99
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 21 AIR CONDITIONING
UF94200
EFFECTIVITY Page 197
ALL
PRESSURIZATION - FUNCTIONAL TEST OF MAN MOTOR
AIRCRAFT CONFIGURATION
On the ground.
No air supply.
Electrical power available.
LDG ELEV selector and DITCHING pushbutton selection
is not necessary to perform this test.
PROCEDURE
Set the MODE SEL pushbutton to MAN.
As long as the MAN V/S CTL switch is held in the DN
position, the MANUAL MOTOR controls the outflow valve
to close.
As long as the MAN V/S CTL switch is held in the UP
position, the outflow valve is controlled to open by
means of the MANUAL MOTOR.
Set the MODE SEL pushbutton back to AUTO.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：ATA 21 AIR CONDITIONING(29)