曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

M.466
DE-EMPHASIZED
OVERSPEED CUE
200
180
160
140
200
M.466
DE-EMPHASIZED
LOW SPEED CUE
1.0
2
R
T
140
120
100
80
1
M.452
20
10
10
20
300
200
100
100
000
8000
TERM
VOR1
TRU
NO FLIGHT PLAN
TCAS
OFF
29.85 IN
2400M
GS
RA
TO
LOC 1
DR TO
ALTS
FMS1
12
DTK 333
.7
YUL
NM
4
4
2
2
1
1
10
2500M 200
N
33
15
12
E
6
3
0
3000
0FT
2
1
TAKEOFF ROLL DISPLAY
1.0
2
T
180
160
140
120
20
10
10
30 300
200
100
100
000
8000
TERM
VOR1
TRU
NO FLIGHT PLAN
TCAS
OFF
29.85 IN
2400M
GS
RA
TO
LOC 1
DR TO
ALTS
FMS1
12
DTK 333
.6
YUL
NM
4
4
2
2
1
1
10
1.2
2500M 200
N
33
15
12
E
6
3
0
3000
VOR2
0FT
2
1
ROTATION DISPLAY
IAS Scale
IAS Pointer
Mach Display
IAS Trend Vector
FLIGHT INSTRUMENTS
11-24 For Training Purposes Only
May 03
P I LOT T R A I N I N G GU I D E
The SET knob on the ADRP is used to change this value. The PUSH OFF switch on
the ADRP enables/disables display of the selected bug. The bug position on the IAS
scale automatically updates as the numeric values change. After five seconds of
inactivity, the speed reference field display blanks.
Speed Reference (Bug) Table
The table displays on the lower portion of the IAS scale when airspeed is less than 40
knots. When the table displays, use the ADRP to select and change one of four
airspeed bugs (V1, VR, V2 or VT).
For Precision-Plus-equipped aircraft, V-speeds can be computed
and entered via the FMS.
V1 Bug
The reference marker is a cyan line followed by a 1. The V1 bug is the takeoff decision
speed reference. The V1 bug is automatically removed at lift-off.
VR Bug
The reference marker is a cyan line followed by an R. The VR bug is the rotation speed
reference. The bug display is automatically removed after the V2 speed is exceeded.
V2 Bug
The reference marker is a cyan line followed by a 2. The V2 bug is the takeoff safety
speed reference. The bug display is automatically removed after the V2 speed is
exceeded (V2 + 40 knots + weight off wheels for 7 seconds).
VT Bug
The reference marker is a cyan line followed by a T. The VT bug is the target speed
reference.
IAS Reference Field
The magenta display shows the selected IAS reference value. The value is marked by
the notched-box (bucket) symbol on the IAS scale. Turn the SPEED knob on the FCP
to set this value. While in Mach mode, turning the SPEED knob then sets a magenta
selected Mach number at the top of the IAS scale and correspondingly moves the
notched-box symbol on the IAS scale.
NOTE
FLIGHT INSTRUMENTS
For Training Purposes Only
May 03
11-25
P I LOT T R A I N I N G GU I D E
IAS Reference Marker
The magenta notched-box symbol is the IAS reference marker. The IAS reference
marker is always selected for display and is set by the SPEED knob on the FCP. While
in Mach mode, the IAS reference marker corresponds to the selected Mach number set
in the reference field at the top of the IAS scale.
Speed Reference (Bug) Field
Figure 11-13
80
60
40
VT 150
V2 133
VR 121
V1 113
20
10
10
20
300
200
100
100
000
8000
TERM
VOR1
TRU
NO FLIGHT PLAN
TCAS
OFF
29.85 IN
2400M
GS
RA
TO
LOC 1
DR TO
ALTS
FMS1
12
DTK 333
.7
YUL
NM
4
4
2
2
1
1
2500M
200
N
33
15
12
E
6
3
0
3000
0FT
2
1
1.0
2
R
T
140
120
100
80
1
20
10
10
20
300
200
100
100
000
8000
TERM
VOR1
TRU
NO FLIGHT PLAN
TCAS
OFF
29.85 IN
2400M
GS
RA
TO
LOC 1
DR TO
ALTS
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：龐巴迪挑戰者手冊1(74)