曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

utilizing the M-bit packet assembly processing as required.
5.2.5.2.8.1.4 Supervisorypacket (SP). This field shall be
set to 3.
5.2.5.2.8.1.5 Supewisory type (ST). This field shall be
set to 1.
5.2.5.2.8.1.6 User data length (LV)+ Thls field shall be
set as specified in 5.2.2.3.1. The maximum size of the user
data field for an INTERRUPT packet shall be 32 bytes.
5.2.5.2.8.1.7 User data (UD). The user data shall be
transferred from the IS0 8208 packet to the Mode S packet
using the S-bit packet reassembly processing as required.
5.2.5.2.8.2 Translatiort irtto IS0 8208packets. Reception
by the XDLS reformatting process of Mode S INTERRUPT
packet(s) from the local XDCE shaH result in the generation
of a corresponding IS0 8208 INTERRUPT packet to the local
DCE. The translation from the Mode S packet(s) to the IS0
8208 packet shall be the inverse of the processing defined in
5.2.5.2.8.1.
5.2.5.2.9 INTERRUPT CONFIRMATION
5.2.5.2.7.2 Translation irtto IS0 8208packets. Reception
by the mLP reformatting process of Mode DATA packet(s) 5.2.5.2.9.1 Transladon into Mode S packets
from the local XDCE shall result in the generation of
corresponding IS0 8208 DATA packet(s) to the local DCE. 5.2.5.2.9.1 -1 Translatedpacketformat. Reception by the
The translation from Mode S packet(s) to the IS0 8208 XD~P process of an ISO 8208 ~ T E R R U ~
packet(s) shall be the inverse of the processing defined in CONFIRMATION packet from the local DCE shall result in
5.2.5.2.7.1. the generation of a corresponding Mode S INTERRUPT
CONFIRMATION packet as follows:
5.2.5.2.8 INTERRUPT
5.2.5.2.8.1 Translation into Mode S packets
5.2.5.2.8.1.1 Translaredpacketformat. Reception by the
XDLP reformatting process of an IS0 8208 INTERRUPT
packet from the local DCE shall result in the generation of Fields shown in the packet format and not specified in the
corresponding Mode S INTERRUPT packet(s) (as determined following pxagraphs shall be set as specified in 5.2.5.2.1.
by S-bit processing (5.2.5.1.4.2)) as follows:
5.2.5.2.9.1.2 Data packet vpe (DP). This field shall be
set to 0.
5.2.5.2.9.1.3 MSP packet type (MP).T his field shall be
set to 1.
Fields shown in the packet format and not specified in the 5.2.5.2.9.1.4 Supewisory packet (SP). This field shall be
following paragraphs shall be set as specified in 5.2.5.2.1. set to 3.
Annex 10 - Aeronauti~al Telecommunications Volume 112
5.2.5.2.9.1.5 Supervisory type (ST). This field shall be
set to 3.
5.2.5.2.9.1.6 Supervisory subset (SS). This field shall be
set to 0.
5.2.5.2.9.2 Translation into IS0 8208packets. Reception
by the XDLP reformatting process of a Mode S INTERRUPT
CONFIRMATION packet from the local XDCE shall result in
the generation of a corresponding IS0 8208 INTERRUFT
CONFIRMATION packet to the local DCE. The translation
from the Mode S packet to the IS0 8208 packet shall be the
inverse of the processing defined in 5.2.5.2.9.1.
The translation from the Mode S packet to the IS0 8208
packet shall be the inverse of the processing defined in
5.2.5.2.10.1.
5.2.5.2.11 IS0 8208 RESTART REQUEST to Mode S
CLEAR REQUEST. The receipt of an IS0 8208 RESTART
REQUEST from the local DCE shall result in the reformatting
process generating a Mode S CLEAR REQUEST by ADLP or
Mode S CLEAR REQUEST by GDLP for all SVCs associated
with the requesting DTE. The fields of the Mode S CLEAR
REQUEST packets shall be set as specified in 5.2.5.2.5 and
5.2.5.2.6.
Note.-- There are no restart states in the Mode S packet
layer protocol.
5.2.5.2.10 RESET REQUEST
5.2.5.2.1,O.l Translation into Mode S packets
5.2.5.2.10.1 .I Translated packet format. Reception by
the XDLP reformatting process of an IS0 8208 RESET
REQUEST packet from the local DCE shall result in the
generation of a corresponding Mode S RESET REQUEST
packet as follows:
5.2.5.3 PACKETSLO CAL TO THE
MODE S SUBNETWORK
Note.- Packets deJned in this section do not result in the
generation of an IS0 8208 packet.
5.2.5.3.1 MODE S RECEIVE READY
5.2.5.3.1.1 Pucket fonnat. The Mode S RECEIVE
READY packet arriving from an XDLP is not related to the
control of the DTWDCE interface and shall not cause the
generation of an IS0 8208 packet. The format of the packet
Fields shown in the packet format and not specified in the be as
following paragraphs shall be set as specified in 5.2.5.2.1.
5.2.5.2.10.1.2 Data pucker type (DP). This field shall be
set to 0.
5.2.5.2.10.1.3 MSPpacket type (MP). This field shall be
set to 1.
5.2.5.2.10.1.4 Supervisory packet (SP). This field shall
be set to 2.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：附件10--航空電信an10_v3_1ed_amend_71(24)