曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

make the most commonly used filters by address, port and/or protocol. For example, if you check the box of
Address filter, select IP address and enter 192.168.6.100 in Address 1, keep Both directions and select IP
address and enter 221.236.12.213 in Address 2, after you confirm your operation and return to the previous page,
you can see the filter you just define listed with a tick indicating that it is accepted. After click Ok to confirm, only
the packets transmitted between 192.168.6.100 and 221.236.12.213 will be analyzed.
The Advanced Filter tab is for you to create more complex filters with a wider range of filter parameters, including
address, port, protocol, packet value, packet size and packet pattern. You need to select a logical rule for a single
filter, the logical rules can be And, Or or Not. See "Advanced filters" for more descriptions.
Add from filter table
Click on the Add button and select From Filter Table... to open a dialog which lists all predefined filters, you can
check one or more filters, before confirm your selection, you need to decide a filter rule: accept or reject the
packets matching filter for analysis.
Add by captured packet
If you want to make a filter on the basis of a captured packet or item, just right click on the item and select Make
Filter.... from the context menu, Colasoft Capsa will fill in the filter automatically. This function is available for the
Diagnoses - Events view, Endpoints view, Protocols view, Packets view, Connections view and Logs view.
New filters can be made at any time and will go into effect immediately.
property of their respective owners. 89 / 89
Filters
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Accepting or rejecting a filter
In Colasoft Capsa you can accept some filters and at the same time reject some others. The packets matching to
the accepted filter will be passed to analyzer and analyzed by Colasoft Capsa, and in reverse if you set the filter as
a rejected filter. To accept or reject a filter, you can:
Decide filter rule when adding/editing filter
property of their respective owners. 90 / 90
Change filter status with the Add/Reject button
Filters
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Saving, editing and removing a filter
Saving a project filter
When you finish the setting of a filter and confirm, Colasoft Capsa will save the filter and list it in the Project
Settings - Filter page. However, since the projects in Colasoft Capsa are all independent, the filter settings of a
project can not be shared by other projects unless you designate the filter setting as default. With the command
Set as default Settings..., you can save a filter and its settings in the configuration category of system, each time
when you open a new project, you can see the filter listed in the Project Settings - Filter page.
Both simple filters and advanced filters can be set as default.
property of their respective owners. 91 / 91
Editing a filter
To edit a filter, double click it from the filter list or use the Edit button. You can make modifications either in the
capture process or when Colasoft Capsa stands by, after confirmation the modifications will be go into effect
instantly.
Note: You are in danger of losing the specified parameters you have already entered as moving from the
Advanced Filter page to the Simple Filter page, you have an opportunity to abort the operation when a warning
appears.
Removing a filter
To delete a filter, make a selection from the filter list and click the Remove button. If you have set the filter as
default, this operation will disable the previous setting.
Filters
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Importing and exporting filters
Import filters
Colasoft Capsa lets you import filters from the files in .cscpflt format. Click the Import... button and select Import
Filter from File..., Colasoft Capsa will open the project file and list all available filter files, select one to open.
If you decide to clear the current filter list when asked, only the filters imported will be showed; if you select No, the
filters imported will be appended to the current filter list.
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料27(50)