曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

the addresses' number. Enters IP addresses and domain name into the address pane, separate each other with a
blank space, comma or semicolon, then clicks the Start Ping button to execute ping command.
For example, ping 67.15.299.157 and www.download.com. For a clear view of the graph of 67.15.299.157,
highlight the item of 67.15.229.157 with move your mouse cursor on it.
To view the details of www.download.com, select the domain name in the Ping - Summary window and move
mouse to its graph. The Ping - Details window will display the corresponding information.
property of their respective owners. 123 / 123
Tools
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Options
Users can custom own parameters of the Ping command. Click the Options… command in the Options menu to
open the dialog and modify the listed parameters.
The below figure is the parameter settings in default.
Packet Size
Sets the size of ICMP packet when execute Ping command. The packet size range from 1 to 1024 bytes.
Packet Time-To-Live
Indicates how many more hops this packet should be allowed to make before being discarded or returned, range
from 1 to 255.
Ping Timeout
The amount of time to allow for a response from the peer equipment, range from 100 to 2000 millisecond.
Delay Between PINGs
The interval time between two pings, range from 100 to 10000 millisecond.
Address transmitted
The amount of host or domain resolution, range from 1 to 5.
Poll Interval
The refresh interval of graph, range from 100 to 5000.
Load Default
Clicks this button to reset all parameters to default position.
property of their respective owners. 124 / 124
Tools
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
External tools
In addition to the four tools referred previous, users can customize to add other Windows applications and tools
into Colasoft Capsa with the External Tools. You can not only invoke but also execute the added applications
and tools via Colasoft Capsa.
The following figure is the tools menu in default.
Click the External tools... command from the Tools menu to open the External Tools dialog page. The following
is an example of how to add the Tracert command of Windows into Colasoft Capsa.
Click the New... button to enable the Property dialog box.
Name the tool as Tracert.
Enter the path of the program C:\WINDOWS\system32\tracert.exe or click the button to choose the path.
Add the parameter $(IP) into Arguments.
property of their respective owners. 125 / 125
Tools
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Click the button to open the Arguments dialog.
property of their respective owners. 126 / 126
Click the Macros >> button to view the details.
Colasoft Capsa lists the parameters IP Address, Physical Address, Port and Protocol in the window. You can
add a parameter by selecting it's name and clicking the Insert button. If the parameters did not listed, you can
enter the parameters into the upper window manually, like as -d, -h, -j and -w in Tracert command. Every
parameter should be separated with a blank space
1. Choose the IP Address and click Insert button. Click the OK button to save the settings and back to the
External Tools dialog.
2. Click the Tracert command in the Tools menu to execute the program.
Tools
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
In addition, you can execute to trace an IP with Colasoft Capsa conveniently. Select a packet in the Packets view
and right click, choose the Tracert command. The source and destination IP address of the selected packet will
be listed out, you can trace either one by its name or both by the All command.
Now let's trace 207.46.26.109 by click its name. System will trace the this IP address and display the details of the
execution in the popup window.
property of their respective owners. 127 / 127
Tools
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料27(60)