曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

The SafeTaxi database contains detailed airport diagrams for selected airports. These diagrams aid in following ground control instructions by accurately displaying the aircraft position on the map in relation to taxiways, ramps, runways, terminals, and services. This database is updated on a 56-day cycle.
The FliteCharts database contains procedure charts for the United States only. This database is updated on a 28-day cycle. If not updated within 180 days of the expiration date, FliteCharts will no longer function.
Updatingpdatingpdating Garmin Databasesatabasesatabasesatabases
The Garmin database updates can be obtained by following the instructions detailed in the ‘Aviation Databases’ section of the Garmin website (www.garmin.com). Once the updated files have been downloaded from the website, a PC equipped with an appropriate SD card reader is used to unpack and program the new databases onto the existing Supplemental Data Cards. Equipment required to perform the update is as follows:
• Windows-compatible PC computer (Windows 2000 or XP recommended)
• SanDisk SD Card Reader, P/Ns SDDR-93 or SDDR-99 or equivalent card reader
• Updated database obtained from the Garmin website
• Existing Supplemental Database SD Cards (010-00330-42 or 010-00330-43 for Synthetic Vision) from both PFDs and MFD
In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database product functional. It may also be necessary to have the system configured by a Garmin authorized service facility in order to use some database features.
After the data has been copied to the appropriate data cards, perform the following steps:
1) Insert one SD card in the bottom card slot of the MFD and one in the bottom card slot of each PFD. The SD card containing the ChartView or FliteCharts database must be inserted into the bottom slot on the MFD.
2) Apply power to the G1000 System. View the MFD power-up splash screen. Check that the databases are initialized and displayed on the splash screen. When updating the terrain and FliteCharts databases, an ‘in progress’ message may be seen. If this message is present, wait for the system to finish loading before verifying the correct databases are initialized, then proceed to step 3.
Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 190-00494-02 Rev. B
SYSTEM
OVERVIEW
FLIGHT
AUDIO PANEL EICAS INSTRUMENTS
& CNS
FLIGHT
MANAGEMENT
HAZARD
ADDITIONAL AFCS AVOIDANCE
INDEX APPENDICES FEATURES 512
Appendix B
Figure B-4 Database Information on the Splash Screen
3) Acknowledge the Power-up Page agreement by pressing the ENT Key or the right most softkey.
4) Turn the large FMS Knob to select the AUX Page group on the MFD.
5) Turn the small FMS Knob to select the System Status Page.
6) Select the DBASE Softkey to place the cursor in the ‘Databaseatabaseatabase’ box.
7) Turn either FMS Knob to scroll through the database list and check that all databases are current and there are no errors.
8) Power down the G1000.
190-00494-02 Rev. B Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS EICAS AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE AFCS ADDITIONAL
FEATURES APPENDICES INDEX
513
Appendix C
ACC accuracy
ACT, ACTV active, activate
ADC air data computer
ADF Automatic Direction Finder
ADI Attitude Direction Indicator
AF Arc to fix
AFCS Automatic Flight Control System
AFM Airplane Flight Manual
AFMS Airplane Flight Manual Supplement
AFRM airframe
AGL Above Ground Level
AHRS Attitude and Heading Reference System
AIM Aeronautical Information Manual
AIRMET Airman’s Meteorological Information
ALRT alert
ALT altitude
ALT, ALTN alternator
AMPS amperes
ANNUNC annunciation
ANT antenna
AP autopilot
AP DISC autopilot disconnect
APR approach
APT airport, aerodrome
ARINC Aeronautical Radio Incorporated
ARSPC airspace
ARTCC Air Route Traffic Control Center
ARV arrival
AS airspeed
ASB Aviation Support Branch
ASOS Automated Surface Observing System
ATC Air Traffic Control
ATCRBS ATC Radar Beacon System
ATIS Automatic Terminal Information Service
ATK along-track
AUTOSEQ automatic sequence
AUX auxiliary
AWOS Automated Weather Observing System
B ALT barometric altitude
BARO barometric setting
BATT battery
BC backcourse
Bearing The compass direction from the present position to a destination waypoint.
BFO beat frequency oscillator
BKSP backspace
BRG bearing
C center runway
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Cessna Citation Mustang Pilot’Guide 2(77)