R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
 TASK 38-31-00-810-813
 Fault in the Generator Power
 1. Possible Causes
_______________
 - RELAY-MOTOR START (36MG)

 - RELAY-FAN PHASE OFF (38MG)

 - GENERATOR-VACUUM (37MG)

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-00-00-810-818 Computer Reset
 ESPM 204650
 AMM 38-31-00-710-009 Operational Test of the Toilet Unit
 AMM 38-31-00-740-001 BITE Test of the Vacuum Toilet System
 AMM 38-31-36-000-001 Removal of the Motor Start Relay (36MG)
 AMM 38-31-36-400-001 Installation of the Motor Start Relay (36MG)
 AMM 38-31-64-000-001 Removal of the Vacuum Generator 37MG
 AMM 38-31-64-400-001 Installation of the Vacuum Generator 37MG
 ASM 38-31/10
 38-31-00-991-001 Fig. 201

 3. Fault Confirmation
__________________
 A. Test.
 (1) Do a test of the vacuum toilet system (Ref. AMM TASK 38-31-00-710-009).
 B. Do the bite test (Ref. AMM TASK 38-31-00-740-001).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞38-31-00∞∞∞∞∞∞∞∞∞∞Page 224
 201-299, May 01/05 CES

 4. Fault Isolation
_______________

 A. If the test gives a different maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 101.
 B. If the operational test is not satisfactory:
 - Refer to the trouble shooting page of the bite test.
 (Ref. Fig. 201/TASK 38-31-00-991-001)

 (1) If the TROUBLE SHOOTING DATA page gives the maintenance message VACU GEN SUPPLY: - open and close the circuit breaker 35MG (Ref. TASK 24-00-00-810-

818).

 (2) If the fault continues:

 (a) Do a check to make sure that the motor start relay 36MG functions correctly when energized:

 - make sure that the voltage at the contactor 36MG-A of the motor start relay is correct (Ref. ASM 38-31/10).

 - make sure that the circuit breakers 32MG, 33MG, 34MG are open.

 - with the circuit breakers 33MG open and 35MG closed do a continuity check between terminals L1-T1, L2-T2 and L3-T3 on the motor start relay 36MG (Ref. ASM 38-31/10).

 (b) Do a check to make sure that the motor start relay 36MG functions correctly when de-energized:

 - make sure that the circuit breakers 32MG, 33MG, 34MG and 35MG are open.

 - make sure that there is no voltage at the contactor 36MG-A of the motor, do a continuity check between terminals L1-T1, L2-T2 and L3-T3 on the motor start relay 36MG (Ref. ASM 38-31/10).

 (3) If there is no continuity in step (2) (a), or continuity in step (2) (b):

 - replace the RELAY-MOTOR START (36MG), (Ref. AMM TASK 38-31-36-000-001) and (Ref. AMM TASK 38-31-36-400-001).

 (4) If the fault continues:

 - do a check of the fan phase relay (Ref. ASM 38-31/10), if necessary:

 - replace the RELAY-FAN PHASE OFF (38MG), (Ref. ESPM 204650).

 (5) If the fault continues:

 - replace the GENERATOR-VACUUM (37MG), (Ref. AMM TASK 38-31-64-000-001) and (Ref. AMM TASK 38-31-64-400-001).
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞38-31-00∞∞∞∞∞∞∞∞∞∞Page 225
 201-299, May 01/05 CES

 C. Test

 (1) Do the test as given in paragraph 3. A. to check the correct operation.

 (2) After the subsequent flight, make sure that the fault does not continue.

 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞38-31-00∞∞∞∞∞∞∞∞∞∞Page 226
 201-299, May 01/05 CES

 TASK 38-31-00-810-817

 NO CFDIU DATA
 1. Possible Causes
_______________
 - CFDIU (1TW)

 - wiring

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 WATER/WASTE(14)