S 374-036

 (10)
 Apply the corrosion inhibitive compound, BMS 3-23, to the area on the structure and the body skin which touches the fairing (AMM 51-24-13/701).

 S 424-037

 (11)
 Install the fasteners which attach the fairing to the structure.

 NOTE: Make sure you install the stainless steel bolts and
____ dimpled washers at the same locations on the fairing panel as they were prior to removal of the panels. Installing different hardware in these locations may result in unacceptable electrical bonding.
 S 434-042
 (12) Connect or install the equipment to the fairing and do an operational test if the equipment was disconnected or removed.
 (a)  Refer to the applicable chapter for the instructions to connect, install or do an operational test of the equipment.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 53-51-01
 ALL  ú ú 01 Page 409 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 WING-TO-BODY FAIRING - ADJUSTMENT/TEST
______________________________________
 1.  General_______
 A.  This procedure has one task. The task gives instructions to adjust the wing-to-body fairing.
 B.  You must adjust the seal clearance between the wing skin and the seal edge which is shown in (Fig.501). You must do this to prevent possible damage to the fillet blade seal below the wing.
 C.  Two procedures are used to measure the seal clearances. The first procedure measures the seal clearances with the fairing panel installed. The second procedure measures the seal clearances with the fairing panel removed.
 TASK 53-51-01-825-001
 2.  Wing-to-Body Fairing - Adjustment (Fig. 501)_________________________________
 A.  References
 (1)
AMM 53-51-01/401, Wing-to-Body Fairing

 (2)
AIPC 53-51-01 Fig. 1

 B.  Access
 (1)  Location Zones
 191 Wing-to-Body Fairing, Left
 192 Wing-to Body Fairing, Right
 193 Wing-to-Body Fairing, Left
 194 Wing-to-Body Fairing, Right

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 53-51-01
 ALL  ú ú 01 Page 501 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

STA
STA
750
1700
SEE  A 
STATION 42  STATION 44  46 STATION 
0 BL  STA STA STA 750 800 840 WING-TO-BODY FAIRING B B A A  STA 880  STA 920  STA 960  STA 1000  1120 STA  1245 STA  1398 STA 1351.35 STA 1357.75 STA  1620 STA 1700 STA 1480 STA 1660 STA 1580 1540 STA STA B B AA 
STA 987.35 (APPROX)  FWD  STA 1253.50 A  WING-TO-BODY FAIRING  0 C BLL 
ALUMINUM FLAME SPRAY 
ALUMINUM FLAME SPRAY - ELECTRICAL CRITICAL 
ANTI-STATIC COATING 
ALUMINUM SHEET 
Wing-to-Body Fairing Adjustment Figure 501 (Sheet 1) 

D20770
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 53-51-01
 ALL  ú ú 01 Page 502 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

CORROSION PREVENTIVE COMPOUND
SEALING (EXAMPLE)
WING-TO-BODY
COMPOUND BODY SKIN
FAIRING

SEE
EXAMPLE FAIRING ATTACHMENT EXAMPLE FAIRING FLANGE ATTACHMENT A-A B-B
DIMPLED
WASHER

NUT PLATE STRUCTURE ____ RESISTANCE IS MEASURED ONLY
NOTE: BETWEEN POINT A AND POINT B. DO NOT MEASURE BETWEEN POINT A AND STRUCTURE.

Wing-to-Body Fairing Adjustment
Figure 501 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 機身 FUSELAGE(43)