*
The report trigger parameters
*
The data collection specifications
*
Automatic datalink
*
QAR
*
The report collection parameters.
You use text fields, selection boxes and cascading menu selections to define and control the report trigger parameters.
Select SEARCH PARAMETER and the parameter search dialog box shows. Use this to choose the collection parameters.
Select DELETE PARAMETER to remove a collection parameter from the list.
Select ARM to enable the report. The defined report trigger then causes collection of the report data. Select DISARM to disable the report.
Select DISPLAY RESULTS to see the report results page.
Select CLEAR REPORT to clear the current report
specifications.
Select PRINT to print a copy of the programmable report
specification page.
EFFECTIVITY BEJ ALL 31-35-00
Page 42
D633W101-BEJ Sep 05/2002
ACMS -OPERATION -PROGRAMMABLE REPORT -SPECIFICATION
EFFECTIVITY BEJ ALL 31-35-00
Page 43
D633W101-BEJ Jan 05/2002
ACMS -OPERATION -PROGRAMMABLE REPORT -RESULTS
General
The programmable report result page shows the data for a report specification. Each report has header information that contains all the information captured in the report specification.
Select DISPLAY SPEC to return to the programmable report specification page.
Select DOWNLINK to transmit the report to a ground station.
Select PRINT to send the report to the flight compartment printer.
EFFECTIVITY BEJ ALL 31-35-00
Page 44
D633W101-BEJ Sep 05/2002
ACMS -OPERATION -PROGRAMMABLE REPORT -RESULTS
EFFECTIVITY BEJ ALL 31-35-00
Page 45
D633W101-BEJ May 05/2002
ACMS -OPERATION -QUICK REPORTS
General
The quick report page gives you a time history for a group of signals. The quick report results show on the MAT during data collection.
You can select the:
*
Report title
*
Signal collection rate
*
Collection signals.
You can identify up to seven collection signals for data collection.
The date and time will show when the report results are displayed.
Command buttons show at the bottom of the display.
Start and Stop
Select START to start the quick report data collection. The report collects and shows 60 values for each collection signal. Select STOP to stop the data collection before all 60 values are collected.
Search and Delete Parameters
Select SEARCH PARAMETER to add a collection signal to the list.
Select DELETE PARAMETER to delete a collection signal from the list.
Clear Report
Select CLEAR REPORT to clear the current quick report specifications.
Print
Select PRINT to send the quick report to the flight compartment printer.
EFFECTIVITY BEJ ALL 31-35-00
Page 46
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
ACMS -OPERATION -QUICK REPORTS
EFFECTIVITY BEJ ALL 31-35-00
Page 47
D633W101-BEJ May 05/2002
ACMS -OPERATION -TRACE LOG
Trace Log
Software engineers use the trace log page to make sure the AMI software operates correctly.
EFFECTIVITY BEJ ALL 31-35-00
Page 48
D633W101-BEJ Jan 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
ACMS -OPERATION -TRACE LOG
EFFECTIVITY BEJ ALL 31-35-00
Page 49
D633W101-BEJ Jan 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
THIS PAGE IS INTENTIONALLY LEFT BLANK
31-35-00
Page 50 D633W101-BEJ Jan 05/2002
ACMS -QAR FRONT PANEL OPERATIONS AND TESTS
General
The quick access recorder (QAR) has a 16 character liquid crystal display (LCD) and a five key keyboard.
Front Panel Features
The LCD display can show:
*
Stored data
*
QAR menus
*
Tests results
*
Messages.
The five keys on the keyboard are the:
*
Mode key for mode selection
*
Plus (+) key to sequence up through a list
*
Minus (-) key to sequence down through a list
*
Set key to enter a selected function from a list
*
Eject key to eject the disk.
Main Menu
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護手冊 指示和記錄系統 1(19)
