WATER STORAGE AND DISTRIBUTION -ISOLATION/DRAIN VALVE AND CONTROL CABLE
EFFECTIVITY BEJ ALL 38-11-00
Page 29
D633W101-BEJ Jan 05/2002
WATER STORAGE AND DISTRIBUTION -ISOLATION HANDLE AND ISOLATION/DRAIN VALVE HANDLE
Purpose
The isolation handle and isolation/drain valve handle let you operate the isolation valve and the isolation/drain valve.
Physical Description
The isolation/drain valve handle and the isolation handle are similar. Each handle connects the valve with a control cable.
The isolation/drain valve handle has three positions, open, closed, and drain. The isolation handle has two positions, open and closed.
Each handle attaches with two bolts.
Location
The isolation/drain handle is behind a panel above the passenger/entry door 2 left. The isolation handle is behind a panel above the passenger entry door 4 left.
Functional Description
When you turn the isolation handle clockwise, the isolation valve closes. This isolates the overhead distribution line. When you turn the handle counterclockwise, the valve opens.
When you turn the isolation/drain valve handle clockwise to the closed position, the isolation/drain valve closes. This isolates the overhead distribution line.
Operation
You turn the isolation and isolation/drain valve handles clockwise to move them to the isolation position. You must pull the isolation/drain valve and turn it to move it to the drain position.
Training Information Point
If the panel for the isolation valve is closed, the valve is in the open position.
EFFECTIVITY BEJ ALL 38-11-00
Page 30
D633W101-BEJ Sep 05/2002
WATER STORAGE AND DISTRIBUTION -ISOLATION HANDLE AND ISOLATION/DRAIN VALVE HANDLE
EFFECTIVITY BEJ ALL 38-11-00
Page 31
D633W101-BEJ May 05/2002
WATER STORAGE AND DISTRIBUTION -INTRODUCTION -LAVATORY
Purpose
The part of the water storage and distribution system that is in the lavatory does these functions:
*
Lets you control the flow of water into the lavatory
*
Distributes water to components in the lavatory
*
Lets you drain water from the lavatory.
Physical Description
A typical lavatory has these water storage and distribution system components:
*
Lavatory water supply shutoff valve
*
Distribution lines and fittings (not shown)
*
Drain valve
*
Faucet (drinking fountain)
*
Filter
*
Faucet.
The system has interfaces with the water heating system and the vacuum waste system.
See the water heating section or more information on water heating (SECTION 38-13).
See the vacuum waste system section for more information on the vacuum waste system (SECTION 38-32).
EFFECTIVITY BEJ ALL 38-11-00
Page 32
D633W101-BEJ Sep 05/2002
WATER STORAGE AND DISTRIBUTION -INTRODUCTION -LAVATORY
EFFECTIVITY BEJ ALL 38-11-00
Page 33
D633W101-BEJ Jan 05/2002
WATER STORAGE AND DISTRIBUTION -LAVATORY WATER SUPPLY SHUTOFF VALVE
Purpose
The lavatory water supply shutoff valve lets you control the flow of water into the lavatory.
Physical Description
The valve has two positions, off and on.
It has two water connectors and a control lever.
Location
There is a valve in each lavatory. It is above the sink and behind the mirror.
EFFECTIVITY BEJ ALL 38-11-00
Page 34
D633W101-BEJ Sep 05/2002
WATER STORAGE AND DISTRIBUTION -LAVATORY WATER SUPPLY SHUTOFF VALVE
EFFECTIVITY BEJ ALL 38-11-00
Page 35
D633W101-BEJ Jan 05/2002
WATER STORAGE AND DISTRIBUTION -LAVATORY DRAIN VALVE
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：777 AMM 飛機維護(hù)手冊 Water and Waste(5)
