曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

To display a label call-up, the operator enters the following parameters, separated by a slash(/) :
- EQ : Equipment number entered by 2 characters. - SYS : System number (1, 2, 3, or 4).
- LAB : Parameter label entered in octal (001 to 377). - SDI : Source destination identifier (00, 01, 10, or 11). - Databits : Number of databits to be used for decimal
conversion (1 to 18). 18 is the default value.
EFFECTIVITY
ALL CFM56-5B ENGINES FOR A319-A320-A321
CFMI PROPRIETARY INFORMATION
 
  CFM56-5B TRAINING MANUAL
 

 
CTC-231-089-00 LABEL CALL-UP
 
EFFECTIVITY
ALL CFM56-5B ENGINES FOR A319-A320-A321
CFMI PROPRIETARY INFORMATION AIDS MESSAGE
INTERROGATION
FAULT DETECTION
& ANNUNCIATION Page 5
Nov 02
  
 
  CFM56-5B TRAINING MANUAL

THE AIRCRAFT INTEGRATED DATA SYSTEM (AIDS). PARAMETER CALL-UP.
Alpha call-up.
This function enables the operator to read out parameter values in real time.
Every alpha call-up defined in the set-up database may be selected to visualize parameters in engineering units. The values are refreshed once per second.
Up to 20 alpha call-ups can be displayed (5 pages). If parameters from 2 systems are available, both parameters are displayed upon a single alpha call-up code entry.
EFFECTIVITY
ALL CFM56-5B ENGINES FOR A319-A320-A321
CFMI PROPRIETARY INFORMATION AIDS MESSAGE
INTERROGATION
FAULT DETECTION
& ANNUNCIATION Page 6
Nov 02
  
 

 
  CFM56-5B TRAINING MANUAL

 
THE AIRCRAFT INTEGRATED DATA SYSTEM (AIDS). PARAMETER CALL-UP.
Menus.
This page provides a list of the menu titles, programmed through Ground Support Equipment (GSE) and available to the operator. Up to 20 menus can be programmed through GSE.
AIDS is supplied with 11 standard menus, spread over three pages. Airlines can choose to add other menus, or change the name of existing menus through GSE.
The 11 standard menus are : Page 1 :
- Test.
- Calgen.
- Engine.
- Report01.
- ECW.
Page 2 :
- Autopilot.
- Fuel_D. - OIQH. - APU1. - APU2.
Page 3 :
- SSEL.
EFFECTIVITY
ALL CFM56-5B ENGINES FOR A319-A320-A321
CFMI PROPRIETARY INFORMATION
 

 
  CFM56-5B TRAINING MANUAL

 
THE AIRCRAFT INTEGRATED DATA SYSTEM (AIDS).
Reports.
The data stored and processed in the DMU can be read in the form of printed reports, which are triggered and generated when specific conditions are met.
A report is a comprehensive set of data related to a specific event (e.g. limit exceedance of engine parameters).
The reports are used in routine follow-up (Trend monitoring) and to provide information in the case of specific events.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：TRAINING MANUAL CFM56-5B FAULT DETECTION & ANNUNCIATION 培訓手冊 CFM56-5B 故障探測與指示(57)