OVERSIZE UNDERSIZE
P02 P05 P10 P15 P20 P30 P40 P50 M03 M06 M10 .002 .005 .010 .015 .020 .030 .040 .050 .003 .006 .010
x x x
x

SEELATEST OF SERVICE NO.1143FOR
EDITION INSTRUCTION APPLICATION.
x x x

x x x x
x x x x
x x x x

SEELATEST OF SERVICE NO. 1142 APPLICATION.
EDITION INSTRUCTION FOR
x x

OF INSTRUCTION APPLICATION.
1256 SEELATEST OF SERVICE NO.1256FOR
SEELATESTEDITIONSERVICE NO. FOR
EDITION INSTRUCTION APPLICATION.
SEELATEST OFSERVICE NO.1256FOR
EDITION INSTRUCTION APPLICATION. SEELATEST OF SERVICE NO.1324FOR
EDITION INSTRUCTION APPLICATION.
X* X* X*

SEELATEST OF SERVICE NO.1324FOR
EDITION INSTRUCTION APPLICATION.
X x* *
x x xx x x

xX xX xX xX
Studsavailablein P03, P07 and P12.
* Also available in P10 oversize.
NOTE

When ordering oversizeand undersize parts, be sure to specify the required oversize and undersize dimensionalong with the proper part number.For example, LW-13884 order part number LW-13884-M3.Oversize
to order bearing in .003 undersize, code letter is "P" while undersize code letter is "M". These letters are then followed by the number designating the size in thousandths of an inch.
iii

0-360,LO-360-A1 CATALOGH6PARTS
WIDECYLINDER CRANKCASE ENGINE
FLANGE MODEL Williamsport Plant KCASE,CRANKSHAFT GROUP
CRANK AND CAMSHAFT
CRANKCASE
ASSEMBLY

FIG. QUANTITY REF. PART PER 1 NUMBER DESCRIPTION ASSEMBLY
1 LW-18386-1* ASSEMBLY 1
CRANKCASE (See note)
LW-18414-1* * CRANKCASE (Seenote)

ASSEMBLY 1
2 75154 STUD, 1/2-13 x 10-1/32 long 2
3 50-15 STUD, 1/2-20 x 1-7/8 long 8
4 38-13 STUD, 3/8-16 x 1-5/8 long 16
5 38D-17 STUD, 3/8-16 x 2-1/8 long, drilled 1

6 LW-13793 STUD, 5/16-18 x 15/16 long, drilled
1

7 31C-12 STUD, 5/16-18 x 1-1/2 long 2 8 31C-13 STUD, 5/16-18 x 1-5/8 long 1
9 38-22 STUD, 3/8-16 x 2-3/4 long
1

10 STD-557 DOWEL,1/2 dia. x 19/32 long, hollow 2
11 72158 BUSHING,Governordriveidler shaft
1

12 STD-514 DOWEL,5/16 dia. x 1/2 long 2
13 69796 DOWEL,Crankshaftbearing 14 1102 PLUG, 1/8-27 NPT, Allen head 15 STD-1623 INSERT,1/4-20Heli-Coilx 3/8
242

16 65007 RETAINER,Shroudtubeseal 8 17 STD-1339 PLUG, 1/16-27 NPT, Allen head 1 18 31C-16 STUD, 5/16-18 x 2.00 long (driven height, 1.35-1.40) 4 19 1102 PLUG, 1/8-27 NPT, Allen head 1
* Used on O-360-A1 H6 engines. * * Used on LO-360-A1
H6 engines.
NOTE

This part not available as a service item. Refer to Service Kit Section 8 for applicable CrankcaseAssy. and thru stud kit part number.
Lycoming 0-360,LO-360-A1H6 CATALOG
PARTS
WIDECYLINDER CRANKCASE ENGINE
FLANGE MODEL
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：lycoming engine IPC illustrated parts catalog 萊康明發動機圖解零件目錄(3)