TO AN ALODINE
INTERIOR AND EXTERIOR PROTECTIVE (NONAERODYNAMIC)
GREEN PRIMER USEDON DETAILS BEFORE INSTALATION, YELLOW PRIMER ADDED AFTER INSTALLATION DUAL COLORS USED FOR INSPECTION PURPOSES ONLY.
OPERATORS ENCOUNTERING DELAMINATION PROBLEMS WITH THEFINISHSHOULD USE BM S 10-79 TYPEII PRIMER IN LIEU OF TYPEI. THEPRMIER SHOULD BEAPPLIED
SUBSTRATE
CHEMICALCONVERSON COATING BMS 10-79 PRIMER BMS 10-60 TYPE II POLYURETHANE ENAMEL
EXTERIO R PROTECTIVE (FILIFORM RESISTANT)
CHEMICAL CONVERSION COATING
BM S 10-20 TYPE II FUEL TANK COATING OR BMS10-11 TYPEI OR 10-79 PRIMER
BMS10-11 TYPEI OR 10-79 PRIMER
BMS10-100 AERO FLEXTOPCOAT
NOTE COROGARD EC 843 OR EC 843S OPTIONAL THEBMS10-100 AND COROGARD TOPCOATS ARE
CHEMICALLY COMPATIBLE BUTHAVE SLIGHT DIFFERENCES IN COLOR
AND FINISH
BMS10-11 (AERO FLEX ORCOROGARD) PAINT SYSTEM
Finish Systems
Figure 1 (Sheet 1)
Volume 1
20-60-00
Page 18
OCT 01/02
GENERAL INFORMATION
STANDARD PREVENTIVE MAINTENANCE PROCEDURES
CHEMICAL CONVERSION COATING
BMS 10-79 PRIMER
(BMS 10-11 TYPE I OPTIONAL)
LAMINAR X-500
TEFLON POLYURETHANE COATING
ABRASION RESISTANT FINISH
CHEMICAL CONVERSION COATING
CHEMICAL CONVERSION COATING
BMS 10-20 FUEL TANK COATING
(ON DETAIL PARTS) BMS 10-20 FUEL TANK COATING
TOUCH-UP REWORKED AREA
BMS 10-11 TYPE I PRIMER
WITH AKZ0 463-6-28 ZINC RICH EPOXY PRIMER (V98502)
FUEL BARRIER COATING
BMS 10-20 FUEL TANK COATING (ON COMPLETED INSTALLATIONS)
INTEGRAL FUEL TANK SECONDARY FUEL BARRIER
Finish Systems
Figure 1 (Sheet 2)
Volume 1
20-60-00
Page 19 OCT 01/02
CORROSION PREVENTION MANUAL
GENERAL INFORMATION
STANDARD PREVENTIVE MAINTENANCE PROCEDURES
ALUMINUM FLAME SPRAY STATIC CONDITIONER AND SURFACER
CHEMICAL CONVERSION COATING BMS 10-21 CONDUCTIVE COATING
BMS 10-11 TYPE I PRIMER BMS 10-60
POLYURETHANE ENAMEL
BMS 10-60
POLYURETHANE ENAMEL
FIBERGLASS REINFORCED PLASTIC EXTERIOR FIBERGLASS REINFORCED PLASTIC EXTERIOR
(ALUMINUM FLAME SPRAYED) (CONDUCTIVE COATED)
BMS 14-4 TYPE I PHOSPHORIC ANODIZE (SERMETEL W) OR FPL ETCH
FOR TOUCH-UP USE BMS 5-89 CORROSION INHIBITING BMS 14-4 TYPE II ADHESIVE PRIMER (CIAP)
(SERMETEL 249 WITH SERMETEL CATALYST 273) SOME ASSEMBLIES HAVE ADDED
COATS OF BMS 10-11 PRIMER OR PRIMER PLUS ENAMEL
HEAT-, WEATHER-, AND OIL-
BONDED STRUCTURE
RESISTANT COATING
Finish Systems
Figure 1 (Sheet 3)
Volume 1
20-60-00
Page 20
OCT 01/02
CORROSION PREVENTION MANUAL
STANDARD PREVENTATIVE MAINTENANCE METHODS
TRANSPORTATION OF LIVE ANIMALS
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 防腐手冊 CORROSION PREVENTION MANUAL 第二冊 一般信息(63)
