曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

* Translating sleeve
* 3 Hydraulic actuators and 2 sync shafts
* 6 Cascades
* 5 Blocker doors
* 5 Blocker door drag links
* 1 T/R opening actuator
* Torque box
* Fan duct inner wall
* 3 Access doors
* Upper and lower sliders and tracks.
The sleeves are in the stow position when they are in the full
forward position. The sleeves are in the deploy position when
they are in the full aft position. The sleeves have sliders which
let the sleeves move forward and aft in tracks.
Each blocker door drag link attaches a blocker door to the inner
duct.
Functional Description
The T/R control system uses the hydraulic actuators to move
the translating sleeves. The sleeves move aft of the cascades
during a deploy operation.
Each drag link permits its blocker door to move into the fan air
exhaust flow as the sleeve move aft.
The blocker doors change the direction of the fan air exhaust
out through the cascades. This causes reverse thrust. The
cascades do not move.
See the thrust reverser control system section for more
information about T/R control. (SECTION 78-36)
THRUST REVERSER - GENERAL DESCRIPTION
EFFECTIVITY
GUN ALL 78-31-00
Page 4
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-001
THRUST REVERSER - GENERAL DESCRIPTION
THRUST REVERSER - GENERAL DESCRIPTION
EFFECTIVITY
GUN ALL 78-31-00
Page 5
D633A101-GUN Feb 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-001
THIS PAGE IS INTENTIONALLY LEFT BLANK
THRUST REVERSER - GENERAL DESCRIPTION
78-31-00
Page 6
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
General
Each thrust reverser has two halves. These are the thrust
reverser components on each half:
* Translating sleeve
* Hydraulic actuators
* Sync shafts
* Cascade segments
* Blocker doors
* Blocker door drag links
* Opening actuator
* Krueger flap deflector (inboard halves only)
* Rubstrip
* Tension latches
* Fire seals
* Insulation blanket
* Torque box, innerwall and aft cascade support ring
* Access doors
* Upper main track slider
* Lower main track slider
* Main track liner
* Auxiliary track liner
* Upper auxiliary track slider
* Lower auxiliary track slider
* Bullnose seal and retainer.
Thrust Reverser
The thrust reverser is made of three major components; the
translating sleeve, the fan duct cowl, and the aft cowl. The inner
surface of the translating sleeve and the outer surface of the fan
duct cowl forms the fan duct for the fan air exhaust. A crosssection
view thru the thrust reverser, aft of the fan, shows a
reduction in cross sectional area over the length of the fan duct;
this feature is used to create thrust from the fan exhaust air.
Thrust Reverser Fan Duct Cowl
The fan duct cowl is part of the thrust reverser assembly. There
are a left and right fan duct cowl for each engine. The fan duct
cowl assembly consists of the following: a one piece inner wall
with upper and lower bifurcation and acoustic features, the
forward torque box, the cascade aft attachment ring, the
cascade segments, the upper hinge and track beam, the lower
latch and track beam, the opening actuator attachment fittings
and the main and auxiliary tracks and track liners for the
translating sleeve.
The cascade segments and inner wall are made of composite
materials. The torque box and upper hinge beam and lower
latch beam are made of aluminum.
THRUST REVERSER - COMPONENT LOCATION
EFFECTIVITY
GUN ALL 78-31-00
Page 7
D633A101-GUN Feb 10/2006
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
CFM56 ENGINES (CFM56-7) 737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
78-31-00-002
The inner wall forms part of the fan duct of the thrust reverser.
The inner wall is a large one-piece composite structure that
forms the upper bifurcation, the cowl that covers the engine
core, and the lower bifurcation. On the airflow side, the inner
wall has acoustic features. The hinge beam is attached to the
upper bifurcation and the latch beam is attached to the lower
bifurcation.
The fan duct inner wall is a composite structure with the drag
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737NGAMM9(102)