曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Delete Sets QNH to STD (29.92/1013)
Home/End Increases/decreases QNH
A Flight Director Type Switch (Crosshair, Inverted-V)
D Flight Director On/Off
Ctrl-F Metric display On/Off
Engine Page
Ctrl-C Toggles the display of the controls (Extra Information, Elevator/Aileron position etc.)
Ctrl-V Toggles MCP value indication above EICAS display
= Switches from Vertical Gauges to Round Gauges and back
Tab Switches to the next Engine display page.
Ctrl-S Toggles "No Smoking" indication
Ctrl-B Toggles "Fasten Seatbelts" indication
Y, U To change distance between PFD and ND (ND position)
Ctrl-E Resets Messages
Project Magenta Revision: 26-May-07
28
Flight Plan Display
When you are not using the CDU/FMS, you can use SBP files (based on the Joe Jureckas SquawkBox Flight
Plan Format) to display your active route in the Navigation Display's MAP, MAP CTR and PLAN modes.
While the route generated by the CDU/FMS is much more detailed (i.e. SID/STAR curves etc.) and also
displays the top of climb and top of descent as well as the vertical path of the VNAV mode, this solution is
more rudimentary but gets you up and running.
The Glass Cockpit software loads a file in the local directory with the name PFD.SBP and displays it on the
ND. This file can change at any time, and can be reloaded by changing the ND mode or the range (with the
CDU it is fully automatic).
The current versions of the Glass Cockpit will automatically read any FS Flight Plan once it has been
saved. The last saved flight plan will then be displayed in the ND. For this, you have to share your FS Flight
Plan folder (normally under My Computer / XXX's Documents / Flight Simulator) for read/write access as
FSPLANS and it will be automatically recognized.
Project Magenta Revision: 26-May-07
29
Boeing-Type CDU & RCDU
The CDU software’s user interface settings are found in the CDU program itself through navigating through
the menu and LSK keys. For effective operation of the CDU software you must perform the actions required
in the Network and Boeing Glass Cockpit Section first.
The following only describes specific program options available to you with regard to the CDU selectable
User Interface. It is not a guide to the operation of the CDU in its role as a Flight Management Computer.
The Project Magenta CDU operates like its counter part in the real aircraft. There are a number of user
configurable options to make it simulate your particular aircraft type. It is assumed that as the CDU is not
of any valued use without an ND display, you have performed the necessary tasks in the Network section
and the Boeing Glass Cockpit of this Manual.
To re-cap:
• File Sharing and the NetDir subfolder of the CDU must be shared
• The Glass Cockpit pfd.ini file must be edited and the text entry AircraftType=CDU must be set if
using the CDU software.
• No CDU ERROR messages are appearing, NETDIR ERROR in the scratch pad or a FAIL light.
The CDU software effectively is the main Flight Management Computer in the Project Magenta Glass
Cockpit System. We do not for simulation purposes at this time employ a redundant system. Within the
extended First Officer Glass Cockpit license it is possible to run a Remote CDU (RCDU). The RCDU provides
the First Officer with an independent display and input device (exactly like on the real a/c). It operates
independently of the Main CDU, but as the Main CDU still performs the actual FMC computations, the Main
CDU program must be running for the RCDU to function.
The RCDU is run on a separate client computer to the CDU. This is networked in the same fashion as the
rest of the PM software.
Project Magenta Revision: 26-May-07
30
The CDU software (and the RCDU) can be run as standalone CDU software solutions or in conjunction with
CDU hardware. The only difference to the two types of operation is that with hardware you will need to run
the CDU in full screen mode as you will no longer need to see the CDU Bitmap graphic. You can do this in
two ways, one by editing the CDU ini file and also through the user menu by pressing the MENU key twice
on the CDU graphic (as outlined in the “General” software section). You need to decide how you will use
the CDU. For this section we will assume a pure software usage when discussing the user options.
Step 1 CDU connected
Make sure MSFS is running and the CDU is connected to it. No FAIL or ERROR messages are appearing.
You have performed the actions in the NETWORK and GLASS COCKPIT sections of the manual.
Step 2 Setting Aircraft Type
When the CDU starts you will be presented with an IDENT page. This gives information about the current
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料12(97)