曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Other user settings that can be select are self explanatory:
• NAV/COM/XPDR, you can enter radio frequencies
• EFIS selectors can alter GC displays via the CDU
• SPD PROTECT, artificial simulated flap and speed protection
• EXTRAS, simulator rate and freeze modes
If you require to reset or gather information about your current NETDIR status, this can be done by going
to the INDEX page of the CDU, and selecting MAINT. Then select the NETDIR option.
Project Magenta Revision: 26-May-07
34
Step 5 Flare Altitude CDU
If running the CDU the flare altitude must be set. If you do not change a/c types then this only needs to be
set once. The flare altitude will determine at what point on an Auto Land the aircraft will start the Flare.
The flare altitude will probably be set at 30 by default; you may want to change this value depending on
what a/c type you are using.
From the INDEX page select MAINT. From this page select the LSK for A/T. In the A/T page if you want to
assign a new flare value, enter it into the scratch pad, and then enter this value by pressing the LSK next to
the FLARE AGL setting. The new value will be added.
Project Magenta Revision: 26-May-07
35
CDU.INI settings
Update: Please check the CDU.INI file for updated information.
There are various items you can customize both within the program and in the program's Initialization file,
CDU.INI; here are some samples of the settings which can be made.
[DISPLAY]
Title=On Sets Title Bar Display on Startup On/Off (see Ctrl-W key below)
WindowName=COMPUTER1 Interesting for EPIC programmers who want to send Keyboard
Commands to a specific window...
TopMost=Off Changing this option to Topmost=On will force the system to keep the
CDU as the topmost window. You can switch to other tasks, such as FS
(if it is running on the same system), but they won't be visible if the PFD
is running full screen, or the PFD will "hide" programs behind it. This
command can be used when you want to set the focus to another
program or when you are running the PFD in a windowed mode and you
want to have it always on top. As an example, you can start FS98,
minimize it, and run the PFD maximized and then press Alt-Tab and
select FS98/FS2000. You can now run the sim, but the PFD stays on top.
You now have a pure IFR simulator.
FSWindow=Off When you set FSWindow=On the CDU Cockpit will look for the Flight
Simulator and become part of that window, i.e. it is maximized and
minimized together with FS. This is only interesting for One PC operation.
FSFocus=Off When you use FSWindow=On you can force the focus back to FS every
time you have clicked on a key within the CDU.
[Network]
DisableAutoNetDir=
=On disables the automatic creation of the NetDir= entry by the CDU,
when it is enabled, you can allow the CDU to force the NetDir onto the
other programs by going to the INIT REF : MAINT : NETDIR menu.
NetDir= Network directory that will be used for the exchange of files between the
PFD/ND, the MCP and the CDU. Entries could be NetDir=E:\Data\
NetDir=\\SERVER1\C\, please check the correct path on your
system.
SBPPathr= Here you can define a location for your SBP files (SquawkBox flight plans)
anywhere on your network or locally. This is for those who use flight
planning programs, SBP is a very popular export format.
[Flight]
LimitMCPSpeed=
Limits the speed that can be selected on the MCP depending on the
current flap limiting speeds
Project Magenta Revision: 26-May-07
36
AutoFlapRetract= Automatically retracts flaps according to the flap limiting speeds
AutoFlapExtract= Automatically extracts flaps according to the flap limiting speeds
[User]
Serial=0 Sets the communication port if you have hardware which can connect
serially to the CDU software.
Font=Arial Allows you to set the Font used in the CDU. Please note that some fonts
may produce strange effects. These will be compensated wherever
possible. The default Font is Arial.
FontBold=Off Sets the font display to normal or bold.
FontFactor=1
Allows you to set the font factor, where the entry 1.2 would be 20%
larger font
Text=Default The CDU can display color text, pure green text or pure white text. To
change it set Text=green or Text=White
Full=Off Enables full-screen (keyboard-less) CDU display. This is interesting for
cockpit builders who have special hardware for the CDU.
InvertFull=Off Allows you to invert the colors on the full text display. I.e. if you set the
Text=Green option, the text will be displayed Black on a Green
background.
Log=Off Enables logging of the route calculation to be made. Slows down
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料12(99)