曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

3) Turn the FMS knobs to select the desired waypoint, and press the ENT Key. The statistics for the selected leg are displayed.
In manual page mode, the other eight trip input data fields must be entered by the pilot, in addition to flight plan and leg selection.
Entering manual data for trip statistics calculations:
1) Select the MANUAL Softkey or select ‘Manual Mode’ from the Page Menu, and press the ENT Key. The cursor may now be positioned in any field in the top right two boxes.
2) Turn the FMS Knobs to move the cursor onto the DEP TIME field and enter the desired value. Press the ENT Key. The statistics are calculated using the new value and the cursor moves to the next entry field. Repeat until all desired values have been entered.
190-00494-02 Rev. B Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 245
Flight Management anagement
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS EICAS AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE AFCS ADDITIONAL
FEATURES APPENDICES INDEX
Weight Planning Noteote: All weight planning page data fields display data rounded to the nearest 10 pounds or 5 kilograms.
Figure 5-98 Weight Planning PageA/C Payload CalculatorBasic Empty Weight Entry -Pilot and Stores Weight Entry -Basic Operating Weight Calculation -Passenger(s) Weight Entry -Cargo Weight Entry -Zero Fuel Weight Calculation -Fuel On Board Sync Softkey(sets FOB to sensor actual)Fuel Weight Calculator - Zero Fuel Weight Calculation - Fuel on Board Entry (or sync) - Aircraft Weight Calculation - Estimated Landing Weight Calculation - Estimated Landing Fuel Calculation - Fuel Reserve Entry - Excess Fuel CalculationEmpty Weight Softkey(selects Basic Empty Weight)
Entering basic empty weight:
1) Select the EMPTY WT Softkey; or press the MENU Key, highlight ‘Set Basic Empty Weight’, and press the ENT Key to select the BASIC EMPTY WEIGHT field.
2) Turn the small FMS Knob to enter the basic empty weight.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
Entering a pilot and stores weight:
1) Press the FMS Knob to activate the cursor and highlight the ‘PILOT AND STORES’ field.
2) Turn the small FMS Knob to enter the pilot and stores weight.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
The basic operating weight is calculated by adding the basic empty weight and the pilot and stores weight.
Entering the number of passengers:
1) Press the FMS Knob to activate the cursor and highlight the ‘PASSENGERS #’ field.
2) Turn the small FMS Knob to enter the number of passengers.
246 Garmin G1000 Pilot’s Guide for the Cessna Citation Mustang 190-00494-02 Rev. B
Flight Management anagement
SYSTEM
OVERVIEW
FLIGHT
AUDIO PANEL EICAS INSTRUMENTS
& CNS
FLIGHT
MANAGEMENT
HAZARD
ADDITIONAL AFCS AVOIDANCE
INDEX APPENDICES FEATURES
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
Entering the average passenger weight:
1) Press the FMS Knob to activate the cursor and highlight the passenger weight field.
2) Turn the small FMS Knob to enter the average passenger weight.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
The total weight of passengers is calculated by multiplying the number of passengers by the average passenger weight.
Entering the cargo weight:
1) Press the FMS Knob to activate the cursor and highlight the ‘CARGO’ field.
2) Turn the small FMS Knob to enter the cargo weight.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
The ‘ZERO FUEL WEIGHT’ is calculated by adding the basic empty, pilot and stores, passenger, and cargo weights.
Entering a fuel on board weight:
1) Press the FMS Knob to activate the cursor and highlight the ‘FUEL ON BOARD’ field.
2) Turn the small FMS Knob to enter the fuel on board.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.r
Entering fuel reserve:
1) Press the FMS Knob to activate the cursor and highlight the ‘FUEL RESEREVES’ field.
2) Turn the small FMS Knob to enter the fuel resereves amount.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor
Synchronizing the fuel on board with the actual measured fuel on board:
Select the FOB SYNC Softkey; or pess the MENU Key, highlight ‘Synchronize Fuel on Board’, and press the ENT Key. The actual measured fuel on board is displayed in the fuel on board field.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Cessna Citation Mustang Pilot’Guide 1(94)