曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

SBPPathr= Here you can define a location for your SBP files (SquawkBox flight plans)
anywhere on your network or locally. This is for those who use flight
planning programs, SBP is a very popular export format.
[Flight]
LimitMCPSpeed= Limits the speed that can be selected on the MCP depending on the
current flap limiting speeds
Project Magenta Revision: 12 March-08
36
AutoFlapRetract= Automatically retracts flaps according to the flap limiting speeds
AutoFlapExtract= Automatically extracts flaps according to the flap limiting speeds
[User]
Serial=0 Sets the communication port if you have hardware which can connect
serially to the CDU software.
Font=Arial Allows you to set the Font used in the CDU. Please note that some fonts
may produce strange effects. These will be compensated wherever
possible. The default Font is Arial.
FontBold=Off Sets the font display to normal or bold.
FontFactor=1 Allows you to set the font factor, where the entry 1.2 would be 20%
larger font
Text=Default The CDU can display color text, pure green text or pure white text. To
change it set Text=green or Text=White
Full=Off Enables full-screen (keyboard-less) CDU display. This is interesting for
cockpit builders who have special hardware for the CDU.
InvertFull=Off Allows you to invert the colors on the full text display. I.e. if you set the
Text=Green option, the text will be displayed Black on a Green
background.
Log=Off Enables logging of the route calculation to be made. Slows down
operation of the CDU considerably and should only be used for tests.
Please keep this option off.
Preflight=Off When set to On the PERF and TAKEOFF pages are reset, requiring
manual entry of weights etc. This option will re-set those values every
time the CDU is re-started
Flush=Off When set to On, the current route is deleted every time you start up the
CDU.
Messages=On Disables the display of messages (Off) in the scratch pad. You have to go
to INIT/REF MESSAGES to read them.
KeyboardLights=Off With this option enabled, when the EXEC light is on then the keyboard
CAPS LOCK light comes on, if the MSG light is on then SCROLL LOCK
comes on.
Keylayout=NR
Defines the layout of the CDU keys, where NR is NAV/RAD, N1 is N1
LIMIT, DI is DIR/INT... these options can be set in the MENU DISPLAY
menu as well.
Case=Brown Defines the colour of the CDU case, it can be brown or gray
Project Magenta Revision: 12 March-08
37
Keyboard Commands CDU
This is the set of keyboard commands for the CDU:
Alt-W Toggles Title Bar
Alt-Q Exits Program
A-Z Corresponds to A-Z on the CDU keyboard
1-0, ., /, +/- Corresponds to the same keys on the CDU keyboard
F1-F6 LSK (line selection key) 1L to LSK 6L
F7-F12 LSK (line selection key) 1R to LSK 6R
Ctrl-F1 INIT/REF key (1st key top row)
Ctrl-F2 RTE key (2nd key top row)
Ctrl-F3 CLB key (depending on key configuration this can also be DEP/ARR)
Ctrl-F4 CRZ key (ALTN 777 or ATC 747)
Ctrl-F5 DES key (VNAV 777 and 747)
Ctrl-F6 MENU key (1st key second row, also FIX 777 747)
Ctrl-F7 LEGS key
Ctrl-F8 DEP ARR key (HOLD 777 747)
Ctrl-F9 HOLD key (FMC COMM 777 747)
Ctrl-F10 PROG key
Ctrl-F11 N1LIMIT (NAV RAD or MENU 777 747) key
Ctrl-F12 FIX key (NAV RAD 777 747)
PgUp PREV key
PgDn NEXT key
Delete DEL key
Backspace CLR key
Enter (CR) EXEC key
Ctrl-R Resize CDU to default
Ctrl-L Toggles LNAV On/Off (only available when the MCP isn't running)
Ctrl-A Toggles FS A/P (only available when the MCP isn't running)
Project Magenta Revision: 12 March-08
38
Ctrl-Shift-L,
Alt-L
Discreet LNAV switch... Ctrl-Shift-L LNAV On, Alt-L LNAV Off (only available when the
MCP isn't running)
Ctrl-X, Ctrl-Z Brightness Increase/Decrease
Flight Plan Display CDU
When you are not using the CDU/FMS, you can use SBP files (based on the Joe Jureckas SquawkBox Flight
Plan Format) to display your active route in the Navigation Display's MAP, MAP CTR and PLAN modes.
It can also automatically read any FS Flight Plan once it has been saved. The last saved flight plan will
then be displayed in the ND. For this, you have to share your FS Flight Plan folder (normally under My
Computer / XXX's Documents / Flight Simulator) for read/write access as FSPLANS and it will be
recognized. To load them into the CDU, press the RTE key twice and select FS Flight Plan
Navaid Database CDU
The CDU included a world-wide database of navaids, fixes, airports, departures and arrivals. This database
has not been extracted from the Flight Simulator database. Some discrepancies are possible.
If you want to add your own data to the database, please edit USERDATA.TXT which you will find in your
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Project Magenta USER MANUAL Revision: 12 March-08(13)