曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(anything above the value of 200 is good, depending on your hardware and graphics card) as well as the
OpenGL acceleration status. This will happen when you first run the software – you can also turn this test
off via the user options discussed later.
This can be:
• Emulated, No OpenGL Acceleration
• Partial MCD acceleration
• Full ICD Acceleration
What you want is Full ICD Acceleration, and here is how you can get it, if the drivers allegedly support it
and the PFD doesn't report it. Some older TNT cards with only 16 or 32MB of memory don't have enough
memory and/or won't accelerate certain modes:
• Reduce the colour depth to 16 bit
• Reduce the resolution to 800x600
If the driver has an ICD driver for OpenGL, it should accelerate now. The next step would be to increase
the resolution. Please check the PFD.INI entry Quality= for ways of changing your display quality with
OpenGL and also these settings can be adjusted via the on screen menu (pressing ESC key) once the
software is up and running.
Project Magenta Revision: 12 March-08
14
Project Magenta Revision: 12 March-08
15
General – Common to all Software
The following section is relevant for the following software: Boeing Glass Cockpit, Airbus Glass Cockpit, RJ
Glass Cockpit, pmSystems, Instructor Station, GAIFR, QuickMap…
The CDU / MCDU and MCP type software are discussed at the end of this section
By its nature, the software is designed to be as versatile as possible. We cater for many different types of
application. For this reason, it is necessary to spend time familiarizing yourself with the basic concepts of
configuration. This section deals with the first level, getting started. From there on, much of the
customisazion techniques and options that are available to you will become self evident by
experimentation. To avoid confusion later, it is important to understand these basics first.
Whether you are running the demo software or the actual software for the first time this still applies. A
note about the demo software, it is the same as the actual software only that it is time limited. It can be
connected to MSFS but requires the same set-up and configuration as discussed previously.
Generally the software will go into a “demo” mode when it is not connected to anything (whether it is the
demo software or full version). It won’t revert to a demo mode if it is connected to MSFS. In demo mode,
the software will create an artificial situation, the instruments will appear as though they are flying, and
screen my change to show all the different modes. This is designed to give an overall impression for pure
demo purposes. But for set-up and configuration it is best to turn it off in the following way. Through this
you will also get an insight into the software main user interface.
Basics
When the software is up and running, by pressing the ESC key on your keyboard, a
default menu will appear superimposed on the screen. This is the main first level
user selectable options interface. The second level is the program ini files that
reside in the main program folders. A text editor can be used to change these, the
ini files are self documented by each option, but generally the options there are for
a more advanced stage of use. The Program Options Menu has further pages that
you can navigate to by clicking on the various options. Some
will simply turn things on or off, whilst other options will
take you to another page. To revert back to the software
itself, just press the ESC key again.
As an example, switch off the demo mode function of the
software. Click
with the mouse
on OTHER
SETTINGS. A
new page will
appear with a
number of other software options.
Uncheck the DEMO FLIGHT MODE. Now the software will
never revert into Demo mode. If you want demo mode back
again simply reselect it. When positioning instruments and
Project Magenta Revision: 12 March-08
16
sizing them to fit your displays you may find that having the demo mode off will help you in that the
software will no longer switch between display modes allowing you time to configure and set it up. This is
true both of the free “demo” software and also the actual full software because the full software will also
switch into demo mode *if* not connected to MSFS or this option is not deselected.
The technique of software configuration applies to many different things that have varying degrees of
importance. Try selecting various options and see the results.
Positioning
The software does not know what screen ratio, screen size or resolution you have. We do not limit to any
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Project Magenta USER MANUAL Revision: 12 March-08(6)