曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

That is all you need to do for the Sever component installation.
The Wideclient component (Wideclient.exe and Wideclient.ini) are placed on your client computers
(computer that you wish to connect to MSFS). You can create a folder perhaps called “WideClient” or copy
them into the PM main program folders – it actually does not matter. Each time you want communication
across the network with MSFS, Wideclient.exe must be running.
Step. 3 GAIFR Setting Server Name or Static IP
WideFS can use either the IPX network protocol for communication or TCP/IP. TCP/IP is now the standard
and we recommend its use on most systems. For IPX usage please refer to Peter Dowson’s documentation
included with the WideFS package.
Generally, after installation (as above) of the various files included in WideFS, as a basic rule you should
not actually have to do anything more but we also like to at least edit the wideserver.ini file, use a text
editor like Windows Notepad. Add the following entries in the first Section of the Wideserver.ini file:
ServerName= (your Server’s Name)
Or
Project Magenta Revision: 12 March-08
66
ServerIPAddr= (your Server’s IP address)
You only need to set either the ServerIPAddr or ServerName (not both). It is recommended that you use
the ServerName option. Then add to the same ini file ProtocolPreferred=TCP (or whatever protocol you
prefer) we recommend TCP at least to start with.
If you do not know how to find your ServerName or IP address please contact Project Magenta support or
refer to the WideFS documentation.
When you first try to “connect” wideclient to MSFS
you may need to allow access for this program by
any Firewalls you have enabled. Otherwise they
may block communication.
To check you have correctly set Widecleint to
communicate with MSFS, run MSFS on the Server,
and then start Wideclient on your client PC by
clicking on wideclient.exe. In the menu bar at the
top of the Wideclient program you should see the
number of clients that are connected. If it is
indicating that nothing is connected, then you need to refer to the network checklist to make sure you have
set everything correctly.
Testing
Provided your network is setup correctly, as a test you may now want to run MSFS on your server. When
MSFS is fully running, click on the WideClient.exe file in the GAIFR panel directory and the WideClient
program will launch. If Wideclient is able to “see” MSFS across the network, on the top of the bar it will say
“Connected” if not it will say “Waiting For Connection”.
If Wideclient is not able to connect to MSFS then you will have to check that everything has been set
correctly as per these instructions, and also consult Peter Dowson’s detailed instructions. Further help can
be obtained from Project Magenta e-mail: support@projectmagenta.com
Project Magenta Revision: 12 March-08
67
GAIFR Normal Start-Up procedures
The normal process to go through to get the software running is as follows.
On your SERVER computer
1) Run MSFS. Use an appropriate aircraft for the GAIFR panel.
On your CLIENT computer
2) Click on the wideclient.exe Icon to launch Wideclient. You should see “Connected” in the menu
bar.
3) Click on the GAIFR icon and the GAIFR panel will start initializing. Select the a/c type panel you
wish to Fly.
• PA28 – Piper Warrior
• Cessna
• Twin Panel (selectable between Seneca and Baron once program is running by pressing ESC menu)
• Black Panel (For use in cockpits and thus requiring no bitmaps)
GAIFR User Options
By pressing the ESC key various user options that pertain to the
graphics quality can be set. Also in the EXTRA OPTIONS setting
you can select either the Piper Seneca or Engine Baron Instrument
and various options for type of instruments.
GAIFR – Positioning ‘Black Panel’
Project Magenta Revision: 12 March-08
68
When using the ‘black panel’ option, to position each gauge, right click it with the mouse and move it to
your required position, and use the + - keys to re-size the gauges. Pressing CTRL – R will reset all gauges
to default.
Keyboard Commands GAIFR
Please Note: Some commands will not work with some panels, especially the "Black" panel.
General
Q Exits Program (Alt-Q shuts down the PC... without a prompt...watch out!)
F displays/hides frame rate and OpenGL acceleration type
W Toggles Title Bar display / Full Screen
Instruments/Pages
Cursor Keys Move displayed Instruments Left, Right, Up, Down
Ctrl-Cursor Keys Move displayed Instruments Left, Right, Up, Down
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Project Magenta USER MANUAL Revision: 12 March-08(23)