曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

• REPORT LEAVING
• REPORT LEVEL
• REPORT PASSING
• REPORT
REACHING.
Select:
• arms the report for
automatic downlink to
ATC when report
conditions are met
• key function changes to
DISARM
• report status changes from
OPEN to ARMED
787 Flight Crew Operations Manual
Communications -
MFD Communications Functions
5.40.6 Boeing Proprietary
CANCEL Displayed when:
• uplink message is
displayed which does
not require an accept
or reject response, or
• an uplink message is
displayed which has
been accepted,
rejected, or
• review message is
displayed.
Inhibited for first 2 seconds of
message display.
Message is removed.
DELETE
(ATC
reports)
Displayed when a downlink
report page is open for entry.
Select:
• deletes the report without
sending.
• displays the COMM
menu.
DISARM
(ATC
reports)
Displayed when an armable
report is ARMED:
• REPORT LEAVING
• REPORT LEVEL
• REPORT PASSING
• REPORT
REACHING
Select:
• disarms automatic report
downlink to ATC
• key function changes to
ARM
• Report status changes
from ARMED to OPEN
DISPLAY
REPORT
Displayed after accepting an
uplink message which contains a
report.
Displays the downlink report attached
to an uplinked message.
DISPLAY
REQUEST
Displayed after accepting an
ATC uplink message which
contains a request.
Downlink request which required an
ATC response is displayed,
EXIT Displayed when:
• a downlink message
is displayed, or
• a manager page is
displayed.
COMM main menu is displayed.
Command
key label
Displayed/Inhibited Key function
787 Flight Crew Operations Manual
Communications -
MFD Communications Functions
Boeing Proprietary 5.40.7
EXIT
MENU
Displayed when menu is
displayed.
COMM main menu is displayed.
LOAD FMC
(ATC
uplink)
Displayed when uplinked ATC
message contains data which can
be loaded into the FMC.
Inhibited when active route is in
a MOD condition.
Select:
• FMC data is transferred
into the active route, and
• FMC modification is
started.
PRINT Displayed when:
• displayed message
can be printed, and
• printer is available.
Inhibited when printer is not
available.
Message is sequenced for printing.
PRINT
LIST
Displayed when:
• new message list page
is displayed, or
• review list page is
displayed.
Inhibited when printer is not
available.
All messages in the list are sequenced
for printing.
REJECT
(uplink
messages)
Displayed when:
• message requires an
accept/reject
response, and
• all message pages
have been displayed.
Inhibited for first 2 seconds of
message display.
Select:
• message rejection
downlinked to message
sender
• ACCEPT and REJECT
command keys removed
• CANCEL command key
displayed
• message status displayed
in info box, and
• message cleared from the
display 5 seconds after
status changes to
REJECTED.
Command
key label
Displayed/Inhibited Key function
787 Flight Crew Operations Manual
Communications -
MFD Communications Functions
5.40.8 Boeing Proprietary
REJECT
REASONS
(ATC reject
downlink)
Displayed when an uplink
message requires an accept or
reject response.
Displays REJECT REASON page.
RESET
(downlink
pages)
Displayed when downlink page
is displayed.
Message parameters are reset to their
default values.
RESET
ALL (ATC
downlink
pages)
Displayed when ATC VERIFY
REQUEST page is displayed.
Select:
• all request parameters on
the VERIFY REQUEST
are set to reset/default
values
• ATC combined request
pages are reset, or
• COMM main menu is
displayed.
RETURN Displayed when:
• a review message is
displayed, or
• a downlink message
is displayed, or
• a VERIFY
REQUEST page is
displayed, or
• a manager page is
displayed.
Previous list page, request page, or
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：787機組操作手冊Flight Crew Operations Manual 2(24)